PartsTable
Technical Data Sheet
Download PDF

10116622 — NUT,PLAIN,HEXAGON

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

10116622: NUT,PLAIN,HEXAGON.

The NUT,PLAIN,HEXAGON is a the manufacturer industrial component. Key specifications include material: STEEL COMP 347 OVERALL, nut_style: HEXAGON, nut_height: 0.126 INCHES MINIMUM AND 0.146 INCHES MAXIMUM IN, thread_class: 3B, thread_series: UNJC, thread_direction: RIGHT-HAND. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-171-4685, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10116622
NSN: 5310-00-171-4685
FSC: 5310 — Nuts and Washers
CAGE: A486G — NIMIKKEISTOKESKUS NCB FINLAND (FIN)
SPECIFICATIONS
materialSTEEL COMP 347 OVERALL
nut_styleHEXAGON
nut_height0.126 INCHES MINIMUM AND 0.146 INCHES MAXIMUM IN
thread_class3B
thread_seriesUNJC
thread_directionRIGHT-HAND
countersink_angle80.0 DEGREES MINIMUM AND 120.0 DEGREES MAXIMUM NUT
surface_treatmentPASSIVATE OVERALL
width_across_flats0.305 INCHES MINIMUM AND 0.313 INCHES MAXIMUM IN
nominal_thread_size0.138 INCHES IN
bearing_surface_typeWASHER FACED
drilled_hole_diameter0.047 INCHES NOMINAL IN
NSN5310-00-171-4685
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 10116622 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.305 INCHES MINIMUM AND 0.313 INCHES MAXIMUM IN
•
BEARING SURFACE FINISH: 63.0 MICROINCHES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: +50T7 FSCM 07482 MFR REF SINGLE TREATMENT RESPONSE OVERALL
•
THREAD SERIES: UNJC
•
HOLE CONFIGURATION STYLE: CONFIGURATION B
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5646 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.138 INCHES IN
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.305 INCHES MINIMUM AND 0.313 INCHES MAXIMUM IN
BEARING SURFACE FINISH63.0 MICROINCHES
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION+50T7 FSCM 07482 MFR REF SINGLE TREATMENT RESPONSE OVERALL
THREAD SERIESUNJC
HOLE CONFIGURATION STYLECONFIGURATION B
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5646 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.138 INCHES IN
NUT HEIGHT0.126 INCHES MINIMUM AND 0.146 INCHES MAXIMUM IN
DRILLED HOLE DIAMETER0.047 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES 1
5033M37P02Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 10116622?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10116622?
10116622 is a NUT,PLAIN,HEXAGON.
What parts can replace 10116622?
There is 1 known substitute for 10116622: 5033M37P02. Substitute compatibility should be verified for your specific system.
What is the NSN for 10116622?
10116622 is cataloged in the U.S. Government catalog under NSN 5310-00-171-4685. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10116622

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.