PartsTable
Technical Data Sheet
Download PDF

10116598 — WASHER,SPRING TENSION

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

10116598: WASHER,SPRING TENSION.

The WASHER,SPRING TENSION is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1075 OVERALL, hole_diameter: 0.755 INCHES MINIMUM AND 0.775 INCHES MAXIMUM IN, overall_height: 0.093 INCHES NOMINAL IN, hardness_rating: 48.0 ROCKWELL C MINIMUM AND 51.0 ROCKWELL C MAXIMUM, outside_diameter: 1.470 INCHES MINIMUM AND 1.500 INCHES MAXIMUM IN, style_designator: SPRING TENSION. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-165-8320, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10116598
NSN: 5310-00-165-8320
FSC: 5310 — Nuts and Washers
CAGE: A486G — NIMIKKEISTOKESKUS NCB FINLAND (FIN)
SPECIFICATIONS
materialSTEEL COMP 1075 OVERALL
hole_diameter0.755 INCHES MINIMUM AND 0.775 INCHES MAXIMUM IN
overall_height0.093 INCHES NOMINAL IN
hardness_rating48.0 ROCKWELL C MINIMUM AND 51.0 ROCKWELL C MAXIMUM
outside_diameter1.470 INCHES MINIMUM AND 1.500 INCHES MAXIMUM IN
style_designatorSPRING TENSION
surface_treatmentOXIDE FILM OVERALL
material_thickness0.045 INCHES NOMINAL IN
material_document_and_classificationAISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL
surface_treatment_document_and_classificationMIL-C-13924,CL 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5310-00-165-8320
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 10116598 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-C-13924,CL 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
•
HARDNESS RATING: 48.0 ROCKWELL C MINIMUM AND 51.0 ROCKWELL C MAXIMUM
•
STYLE DESIGNATOR: SPRING TENSION
•
MATERIAL DOCUMENT AND CLASSIFICATION: AISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
OUTSIDE DIAMETER: 1.470 INCHES MINIMUM AND 1.500 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.045 INCHES NOMINAL IN
•
COLOR: BLACK OVERALL
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.093 INCHES NOMINAL IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-C-13924,CL 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
HARDNESS RATING48.0 ROCKWELL C MINIMUM AND 51.0 ROCKWELL C MAXIMUM
STYLE DESIGNATORSPRING TENSION
MATERIAL DOCUMENT AND CLASSIFICATIONAISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL
OUTSIDE DIAMETER1.470 INCHES MINIMUM AND 1.500 INCHES MAXIMUM IN
MATERIAL THICKNESS0.045 INCHES NOMINAL IN
COLORBLACK OVERALL
SURFACE TREATMENTOXIDE FILM OVERALL
MATERIALSTEEL COMP 1075 OVERALL
SUBSTITUTES & CROSS-REFERENCES 6
5808-39-45Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
67A98B120Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
38 82004 0005 1Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
24327Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
38-82004-0004-1Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
9283324-01Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 10116598?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10116598?
10116598 is a WASHER,SPRING TENSION.
What parts can replace 10116598?
There are 6 known substitutes for 10116598: 5808-39-45, 67A98B120, 38 82004 0005 1 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 10116598?
10116598 is cataloged in the U.S. Government catalog under NSN 5310-00-165-8320. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10116598

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.