PartsTable
Technical Data Sheet
Download PDF

10116566 — WASHER,FLAT

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

10116566: WASHER,FLAT.

The WASHER,FLAT is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY 268 OR COPPER ALLOY 270 OVERALL, thickness: 0.022 INCHES MINIMUM AND 0.042 INCHES MAXIMUM IN, hole_diameter: 0.193 INCHES MINIMUM AND 0.213 INCHES MAXIMUM IN, overall_diameter: 0.433 INCHES MINIMUM AND 0.458 INCHES MAXIMUM IN, surface_treatment: TIN OVERALL, peripheral_shape_style: ROUND. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-136-1471, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10116566
NSN: 5310-00-136-1471
FSC: 5310 — Nuts and Washers
CAGE: A486G — NIMIKKEISTOKESKUS NCB FINLAND (FIN)
SPECIFICATIONS
materialCOPPER ALLOY 268 OR COPPER ALLOY 270 OVERALL
thickness0.022 INCHES MINIMUM AND 0.042 INCHES MAXIMUM IN
hole_diameter0.193 INCHES MINIMUM AND 0.213 INCHES MAXIMUM IN
overall_diameter0.433 INCHES MINIMUM AND 0.458 INCHES MAXIMUM IN
surface_treatmentTIN OVERALL
peripheral_shape_styleROUND
center_hole_shape_styleROUND
cross-sectional_shape_styleRECTANGULAR
material_document_and_classificationQQ-W-321,1/2 HARD FED SPEC 1ST MATERIAL RESPONSE OR QQ-B-626,1/2 HARD FED SPEC 2ND MATERIAL RESPONSE OVERALL
surface_treatment_document_and_classificationMIL-T-10727,TY 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5310-00-136-1471
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 10116566 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-T-10727,TY 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
•
OVERALL DIAMETER: 0.433 INCHES MINIMUM AND 0.458 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-W-321,1/2 HARD FED SPEC 1ST MATERIAL RESPONSE OR QQ-B-626,1/2 HARD FED SPEC 2ND MATERIAL RESPONSE OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR
•
SURFACE TREATMENT: TIN OVERALL
•
PERIPHERAL SHAPE STYLE: ROUND
•
MATERIAL: COPPER ALLOY 268 OR COPPER ALLOY 270 OVERALL
•
CENTER HOLE SHAPE STYLE: ROUND
TECHNICAL CHARACTERISTICS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-T-10727,TY 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
OVERALL DIAMETER0.433 INCHES MINIMUM AND 0.458 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-W-321,1/2 HARD FED SPEC 1ST MATERIAL RESPONSE OR QQ-B-626,1/2 HARD FED SPEC 2ND MATERIAL RESPONSE OVERALL
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
SURFACE TREATMENTTIN OVERALL
PERIPHERAL SHAPE STYLEROUND
MATERIALCOPPER ALLOY 268 OR COPPER ALLOY 270 OVERALL
CENTER HOLE SHAPE STYLEROUND
HOLE DIAMETER0.193 INCHES MINIMUM AND 0.213 INCHES MAXIMUM IN
THICKNESS0.022 INCHES MINIMUM AND 0.042 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 6
401-6357200-95Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
5310PL0150243Reference document
Same NSN cross-reference
Reference document — Informative reference only
AN961-10TReference document
Same NSN cross-reference
Reference document — Secondary reference
MS45901-4Reference document
Same NSN cross-reference
Reference document — Secondary reference
310-0751-020Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
Z00.N5741498260TBMReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy 10116566?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10116566?
10116566 is a WASHER,FLAT.
What parts can replace 10116566?
There are 6 known substitutes for 10116566: 401-6357200-95, 5310PL0150243, AN961-10T and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 10116566?
10116566 is cataloged in the U.S. Government catalog under NSN 5310-00-136-1471. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10116566

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.