PartsTable
Technical Data Sheet
Download PDF

10115004 — SCREW,MACHINE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

10115004: SCREW,MACHINE.

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: PAN NO. 2, head_height: 0.045 INCHES MINIMUM AND 0.053 INCHES MAXIMUM IN, thread_class: 2A A, head_diameter: 0.155 INCHES MINIMUM AND 0.167 INCHES MAXIMUM IN, thread_length: 0.313 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN, screw_material: STEEL.

This part is cataloged in the U.S. Government catalog under NSN 5305-01-094-7624, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10115004
NSN: 5305-01-094-7624
FSC: 5305 — Screws
CAGE: A486G — NIMIKKEISTOKESKUS NCB FINLAND (FIN)
SPECIFICATIONS
head_stylePAN NO. 2
head_height0.045 INCHES MINIMUM AND 0.053 INCHES MAXIMUM IN
thread_class2A A
head_diameter0.155 INCHES MINIMUM AND 0.167 INCHES MAXIMUM IN
thread_length0.313 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
screw_materialSTEEL
fastener_length0.344 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
internal_drive_styleSLOT
nominal_thread_diameter0.086 INCHES IN
screw_surface_treatmentCADMIUM
thread_quantity_per_inch64
NSN5305-01-094-7624
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 10115004 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.045 INCHES MINIMUM AND 0.053 INCHES MAXIMUM IN
•
SCREW SURFACE TREATMENT: CADMIUM
•
FASTENER LENGTH: 0.344 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
•
THREAD LENGTH: 0.313 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
•
NOMINAL THREAD DIAMETER: 0.086 INCHES IN
•
HEAD STYLE: PAN NO. 2
•
THREAD DIRECTION: RIGHT-HAND
•
SCREW MATERIAL: STEEL
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.045 INCHES MINIMUM AND 0.053 INCHES MAXIMUM IN
SCREW SURFACE TREATMENTCADMIUM
FASTENER LENGTH0.344 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
THREAD LENGTH0.313 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
NOMINAL THREAD DIAMETER0.086 INCHES IN
HEAD STYLEPAN NO. 2
THREAD DIRECTIONRIGHT-HAND
SCREW MATERIALSTEEL
INTERNAL DRIVE STYLESLOT
THREAD CLASS2A A
OTHER ITEMS IN FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-001-5016 5305-00-001-9160 5305-00-001-9629 5305-00-001-9742 5305-00-001-9768 5305-00-003-4306 5305-00-003-6694 5305-00-003-6753
SUBSTITUTES & CROSS-REFERENCES 1
30-295-401-14Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Terminal item — no further procurement; issued until stock is exhaustedNo demilitarization required
Ready to buy 10115004?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10115004?
10115004 is a SCREW,MACHINE.
What parts can replace 10115004?
There is 1 known substitute for 10115004: 30-295-401-14. Substitute compatibility should be verified for your specific system.
What is the NSN for 10115004?
10115004 is cataloged in the U.S. Government catalog under NSN 5305-01-094-7624. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10115004