10114909: SCREW,MACHINE.
The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: FLAT COUNTERSUNK UNDERCUT, head_height: 0.018 INCHES MINIMUM AND 0.025 INCHES MAXIMUM IN, thread_class: 2A A, head_diameter: 0.099 INCHES MINIMUM AND 0.119 INCHES MAXIMUM IN, thread_length: 0.050 INCHES MINIMUM AND 0.082 INCHES MAXIMUM IN, fastener_length: 0.100 INCHES NOMINAL IN. This part is cataloged in the U.S.
Government catalog under NSN 5305-01-047-6233, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
| head_style | FLAT COUNTERSUNK UNDERCUT |
| head_height | 0.018 INCHES MINIMUM AND 0.025 INCHES MAXIMUM IN |
| thread_class | 2A A |
| head_diameter | 0.099 INCHES MINIMUM AND 0.119 INCHES MAXIMUM IN |
| thread_length | 0.050 INCHES MINIMUM AND 0.082 INCHES MAXIMUM IN |
| fastener_length | 0.100 INCHES NOMINAL IN |
| thread_direction | RIGHT-HAND |
| countersink_angle | 811.0 DEGREES NOMINAL |
| internal_drive_style | CROSS RECESS TYPE 1 |
| nominal_thread_diameter | 0.060 INCHES IN |
| screw_surface_treatment | PASSIVATE |
| thread_quantity_per_inch | 80 |
| NSN | 5305-01-047-6233 |
| HEAD HEIGHT | 0.018 INCHES MINIMUM AND 0.025 INCHES MAXIMUM IN |
| SCREW SURFACE TREATMENT | PASSIVATE |
| FASTENER LENGTH | 0.100 INCHES NOMINAL IN |
| THREAD LENGTH | 0.050 INCHES MINIMUM AND 0.082 INCHES MAXIMUM IN |
| NOMINAL THREAD DIAMETER | 0.060 INCHES IN |
| HEAD STYLE | FLAT COUNTERSUNK UNDERCUT |
| THREAD DIRECTION | RIGHT-HAND |
| SCREW MATERIAL | STEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 302B OR STEEL COMP 303 OR STEEL COMP 303SE OR STEEL COMP 304 OR STEEL COMP 304L OR STEEL COMP 305 OR STEEL COMP 308 OR STEEL COMP 309 OR STEEL COMP 309S OR STEEL COMP 310 OR STEEL COMP 310S OR STEEL COMP 314 OR STEEL COMP 316 OR STEEL COMP 316L OR STEEL COMP 317 OR STEEL COMP 321 OR STEEL COMP 347 OR STEEL COMP 348 OR STEEL COMP 384 OR STEEL COMP 385 |
| INTERNAL DRIVE STYLE | CROSS RECESS TYPE 1 |
| COUNTERSINK ANGLE | 811.0 DEGREES NOMINAL |
No substitute or cross-reference records for this part.