PartsTable
Technical Data Sheet
Download PDF

10113624 — SCREW,MACHINE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

10113624: SCREW,MACHINE.

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: FLAT COUNTERSUNK, thread_class: 3A A, head_diameter: 0.332 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN, thread_length: 0.265 INCHES MINIMUM AND 0.358 INCHES MAXIMUM IN, screw_material: STEEL COMP 4037 OR STEEL COMP 8630, fastener_length: 0.407 INCHES MINIMUM AND 0.438 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-272-8306, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10113624
NSN: 5305-01-272-8306
FSC: 5305 — Screws
CAGE: A486G — NIMIKKEISTOKESKUS NCB FINLAND (FIN)
SPECIFICATIONS
head_styleFLAT COUNTERSUNK
thread_class3A A
head_diameter0.332 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
thread_length0.265 INCHES MINIMUM AND 0.358 INCHES MAXIMUM IN
screw_materialSTEEL COMP 4037 OR STEEL COMP 8630
fastener_length0.407 INCHES MINIMUM AND 0.438 INCHES MAXIMUM IN
hardness_rating26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM
thread_directionRIGHT-HAND
countersink_angle99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
internal_drive_styleCROSS RECESS TYPE 1
nominal_thread_diameter0.190 INCHES IN
screw_surface_treatmentCADMIUM AND CHROMATE
NSN5305-01-272-8306
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 10113624 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SCREW SURFACE TREATMENT: CADMIUM AND CHROMATE
•
FASTENER LENGTH: 0.407 INCHES MINIMUM AND 0.438 INCHES MAXIMUM IN
•
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: AMS 6300 ASSN STD 1ST MATERIAL RESPONSE OR MIL-S-6050 MIL SPEC 2ND MATERIAL RESPONSE
•
THREAD LENGTH: 0.265 INCHES MINIMUM AND 0.358 INCHES MAXIMUM IN
•
HARDNESS RATING: 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM
•
NOMINAL THREAD DIAMETER: 0.190 INCHES IN
•
HEAD STYLE: FLAT COUNTERSUNK
•
THREAD DIRECTION: RIGHT-HAND
TECHNICAL CHARACTERISTICS
SCREW SURFACE TREATMENTCADMIUM AND CHROMATE
FASTENER LENGTH0.407 INCHES MINIMUM AND 0.438 INCHES MAXIMUM IN
SCREW MATERIAL DOCUMENT AND CLASSIFICATIONAMS 6300 ASSN STD 1ST MATERIAL RESPONSE OR MIL-S-6050 MIL SPEC 2ND MATERIAL RESPONSE
THREAD LENGTH0.265 INCHES MINIMUM AND 0.358 INCHES MAXIMUM IN
HARDNESS RATING26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM
NOMINAL THREAD DIAMETER0.190 INCHES IN
HEAD STYLEFLAT COUNTERSUNK
THREAD DIRECTIONRIGHT-HAND
SPECIFICATION/STANDARD DATA80205-NAS514 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
SCREW MATERIALSTEEL COMP 4037 OR STEEL COMP 8630
SUBSTITUTES & CROSS-REFERENCES 2
104207Reference document
Same NSN cross-reference
Reference document — Secondary reference
991-4-13602-007Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 10113624?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10113624?
10113624 is a SCREW,MACHINE.
What parts can replace 10113624?
There are 2 known substitutes for 10113624: 104207, 991-4-13602-007. Substitute compatibility should be verified for your specific system.
What is the NSN for 10113624?
10113624 is cataloged in the U.S. Government catalog under NSN 5305-01-272-8306. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10113624

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.