PartsTable
Technical Data Sheet
Download PDF

10113568 — SCREW,CAP,SOCKET HEAD

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

10113568: SCREW,CAP,SOCKET HEAD.

The SCREW,CAP,SOCKET HEAD is a the manufacturer industrial component. Key specifications include material: STEEL COMP XM-13 OVERALL, head_style: FILLISTER, head_height: 0.340 INCHES NOMINAL IN, thread_class: 3A A, head_diameter: 0.7995 INCHES MINIMUM AND 0.8000 INCHES MAXIMUM IN, thread_length: 0.628 INCHES MINIMUM AND 0.678 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-236-9157, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10113568
NSN: 5305-01-236-9157
FSC: 5305 — Screws
CAGE: A486G — NIMIKKEISTOKESKUS NCB FINLAND (FIN)
SPECIFICATIONS
materialSTEEL COMP XM-13 OVERALL
head_styleFILLISTER
head_height0.340 INCHES NOMINAL IN
thread_class3A A
head_diameter0.7995 INCHES MINIMUM AND 0.8000 INCHES MAXIMUM IN
thread_length0.628 INCHES MINIMUM AND 0.678 INCHES MAXIMUM IN
fastener_length2.178 INCHES MINIMUM AND 2.208 INCHES MAXIMUM IN
special_featuresTWO HOLES DRILLED IN THREADED PORTION 90 DEGREES APART; CENTER OF HOLES 0.179 MIN AND 0.189 MAX FROM END OF SCREW
thread_directionRIGHT-HAND
surface_treatmentPASSIVATE OVERALL
width_across_flats0.3130 INCHES MINIMUM AND 0.3150 INCHES MAXIMUM IN
internal_drive_styleHEXAGON
NSN5305-01-236-9157
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 10113568 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.3130 INCHES MINIMUM AND 0.3150 INCHES MAXIMUM IN
•
HEAD HEIGHT: 0.340 INCHES NOMINAL IN
•
FASTENER LENGTH: 2.178 INCHES MINIMUM AND 2.208 INCHES MAXIMUM IN
•
THREAD LENGTH: 0.628 INCHES MINIMUM AND 0.678 INCHES MAXIMUM IN
•
SHANK UNTHREADED HOLE DIAMETER: 0.141 INCHES MINIMUM AND 0.151 INCHES MAXIMUM ALL HOLES IN
•
NOMINAL THREAD DIAMETER: 0.625 INCHES IN
•
HEAD STYLE: FILLISTER
•
THREAD DIRECTION: RIGHT-HAND
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.3130 INCHES MINIMUM AND 0.3150 INCHES MAXIMUM IN
HEAD HEIGHT0.340 INCHES NOMINAL IN
FASTENER LENGTH2.178 INCHES MINIMUM AND 2.208 INCHES MAXIMUM IN
THREAD LENGTH0.628 INCHES MINIMUM AND 0.678 INCHES MAXIMUM IN
SHANK UNTHREADED HOLE DIAMETER0.141 INCHES MINIMUM AND 0.151 INCHES MAXIMUM ALL HOLES IN
NOMINAL THREAD DIAMETER0.625 INCHES IN
HEAD STYLEFILLISTER
THREAD DIRECTIONRIGHT-HAND
SPECIAL FEATURESTWO HOLES DRILLED IN THREADED PORTION 90 DEGREES APART; CENTER OF HOLES 0.179 MIN AND 0.189 MAX FROM END OF SCREW
SURFACE TREATMENTPASSIVATE OVERALL
SUBSTITUTES & CROSS-REFERENCES 3
MB178-10Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
81743Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
VS3292-1Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 10113568?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10113568?
10113568 is a SCREW,CAP,SOCKET HEAD.
What parts can replace 10113568?
There are 3 known substitutes for 10113568: MB178-10, 81743, VS3292-1. Substitute compatibility should be verified for your specific system.
What is the NSN for 10113568?
10113568 is cataloged in the U.S. Government catalog under NSN 5305-01-236-9157. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10113568

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.