10113208 — CLAMP,LOOP

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

10113208: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.204 INCHES NOMINAL IN, material: RUBBER CHLOROPRENE CLASS CR CUSHION, loop_width: 0.235 INCHES MINIMUM AND 0.265 INCHES MAXIMUM IN, loop_length: 0.797 INCHES MINIMUM IN, overall_width: 0.500 INCHES NOMINAL IN, style_designator: RECTANGULAR. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-353-9058, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

10113208

NSN: 5340-01-353-9058
FSC: 5340 — Hardware, Commercial
CAGE: A486G — NIMIKKEISTOKESKUS NCB FINLAND (FIN)

SPECIFICATIONS

diameter	0.204 INCHES NOMINAL IN
material	RUBBER CHLOROPRENE CLASS CR CUSHION
loop_width	0.235 INCHES MINIMUM AND 0.265 INCHES MAXIMUM IN
loop_length	0.797 INCHES MINIMUM IN
overall_width	0.500 INCHES NOMINAL IN
style_designator	RECTANGULAR
tongue_hole_type	ROUND, UNTHREADED
material_thickness	0.032 INCHES NOMINAL IN
material_document_and_classification	QQ-A-250/5 FED SPEC SINGLE MATERIAL RESPONSE BAND
distance_from_loop_center_to_tongue_end	1.433 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole	1.214 INCHES NOMINAL IN
NSN	5340-01-353-9058

COMPONENT DIAGRAM

KEY FEATURES

•

LOOP WIDTH: 0.235 INCHES MINIMUM AND 0.265 INCHES MAXIMUM IN

•

STYLE DESIGNATOR: RECTANGULAR

•

MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-250/5 FED SPEC SINGLE MATERIAL RESPONSE BAND

•

DIAMETER: 0.204 INCHES NOMINAL IN

•

MATERIAL THICKNESS: 0.032 INCHES NOMINAL IN

•

DISTANCE FROM LOOP CENTER TO TONGUE END: 1.433 INCHES NOMINAL IN

•

TONGUE HOLE TYPE: ROUND, UNTHREADED

TECHNICAL CHARACTERISTICS

LOOP WIDTH	0.235 INCHES MINIMUM AND 0.265 INCHES MAXIMUM IN
STYLE DESIGNATOR	RECTANGULAR
MATERIAL DOCUMENT AND CLASSIFICATION	QQ-A-250/5 FED SPEC SINGLE MATERIAL RESPONSE BAND
DIAMETER	0.204 INCHES NOMINAL IN
OVERALL WIDTH	0.500 INCHES NOMINAL IN
MATERIAL THICKNESS	0.032 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END	1.433 INCHES NOMINAL IN
TONGUE HOLE TYPE	ROUND, UNTHREADED
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE	1.214 INCHES NOMINAL IN
MATERIAL	RUBBER CHLOROPRENE CLASS CR CUSHION

OTHER ITEMS IN FSC 5340 — Hardware, Commercial

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275

SUBSTITUTES & CROSS-REFERENCES 2

ST9M633WD4-13Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

487WD4-13Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy 10113208?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 10113208?

10113208 is a CLAMP,LOOP.

What parts can replace 10113208?

There are 2 known substitutes for 10113208: ST9M633WD4-13, 487WD4-13. Substitute compatibility should be verified for your specific system.

What is the NSN for 10113208?

10113208 is cataloged in the U.S. Government catalog under NSN 5340-01-353-9058. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

10113208 — CLAMP,LOOP

Request a Quote — 10113208