PartsTable
Technical Data Sheet
Download PDF

10113038 — BRACKET,ANGLE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

10113038: BRACKET,ANGLE.

The BRACKET,ANGLE is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY, first_leg_style: CORNER RADIUS, first_leg_width: 1.000 INCHES NOMINAL IN, first_leg_length: 0.610 INCHES NOMINAL IN, second_leg_width: 1.000 INCHES NOMINAL IN, special_features: MADE 0.220 IN. W,0.350 IN.

LG SLOT FROM ONE HOLE IN. This part is cataloged in the U.S. Government catalog under NSN 5340-01-253-6903, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10113038
NSN: 5340-01-253-6903
FSC: 5340 — Hardware, Commercial
CAGE: A486G — NIMIKKEISTOKESKUS NCB FINLAND (FIN)
SPECIFICATIONS
materialALUMINUM ALLOY
first_leg_styleCORNER RADIUS
first_leg_width1.000 INCHES NOMINAL IN
first_leg_length0.610 INCHES NOMINAL IN
second_leg_width1.000 INCHES NOMINAL IN
special_featuresMADE 0.220 IN. W,0.350 IN. LG SLOT FROM ONE HOLE IN
style_designatorANGLE
second_leg_length0.610 INCHES NOMINAL IN
mounting_hole_typePLAIN
first_leg_corner_radius0.250 INCHES NOMINAL IN
first_leg_hole_diameter0.220 INCHES NOMINAL IN
second_leg_corner_radius0.250 INCHES NOMINAL IN
NSN5340-01-253-6903
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 10113038 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.250 INCHES NOMINAL IN
•
FIRST LEG HOLE DIAMETER: 0.220 INCHES NOMINAL IN
•
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH: 0.500 INCHES NOMINAL IN
•
SECOND LEG RELATIONSHIP TO FIRST LEG: IDENTICAL
•
FIRST LEG CORNER RADIUS: 0.250 INCHES NOMINAL IN
•
SECOND LEG WIDTH: 1.000 INCHES NOMINAL IN
•
SECOND LEG LENGTH: 0.610 INCHES NOMINAL IN
•
FIRST LEG HOLE ARRANGEMENT STYLE: TWO HOLES
TECHNICAL CHARACTERISTICS
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH0.250 INCHES NOMINAL IN
FIRST LEG HOLE DIAMETER0.220 INCHES NOMINAL IN
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH0.500 INCHES NOMINAL IN
SECOND LEG RELATIONSHIP TO FIRST LEGIDENTICAL
FIRST LEG CORNER RADIUS0.250 INCHES NOMINAL IN
SECOND LEG WIDTH1.000 INCHES NOMINAL IN
SECOND LEG LENGTH0.610 INCHES NOMINAL IN
FIRST LEG HOLE ARRANGEMENT STYLETWO HOLES
STYLE DESIGNATORANGLE
FIRST LEG STYLECORNER RADIUS
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
74A322501-2125Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 10113038?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10113038?
10113038 is a BRACKET,ANGLE.
What parts can replace 10113038?
There is 1 known substitute for 10113038: 74A322501-2125. Substitute compatibility should be verified for your specific system.
What is the NSN for 10113038?
10113038 is cataloged in the U.S. Government catalog under NSN 5340-01-253-6903. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10113038

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.