10113003 — BRACKET,DOUBLE ANGLE

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

10113003: BRACKET,DOUBLE ANGLE.

The BRACKET,DOUBLE ANGLE is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 2024, first_leg_angle: 90.0 DEGREES NOMINAL, first_leg_style: CORNER RADIUS, first_leg_width: 1.000 INCHES NOMINAL IN, second_leg_angle: 90.0 DEGREES NOMINAL, second_leg_style: CORNER RADIUS. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-237-4215, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

10113003

NSN: 5340-01-237-4215
FSC: 5340 — Hardware, Commercial
CAGE: A486G — NIMIKKEISTOKESKUS NCB FINLAND (FIN)

SPECIFICATIONS

material	ALUMINUM ALLOY 2024
first_leg_angle	90.0 DEGREES NOMINAL
first_leg_style	CORNER RADIUS
first_leg_width	1.000 INCHES NOMINAL IN
second_leg_angle	90.0 DEGREES NOMINAL
second_leg_style	CORNER RADIUS
second_leg_width	1.000 INCHES NOMINAL IN
special_features	ITEM ATTACHED WITH RIVETS; REQUIRES CLIP NUT,LH POSITION
style_designator	DOUBLE ANGLE
surface_treatment	PRIMER AND CHROMATE
mounting_hole_type	PLAIN
first_leg_thickness	0.050 INCHES NOMINAL IN
NSN	5340-01-237-4215

COMPONENT DIAGRAM

KEY FEATURES

•

SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.500 INCHES NOMINAL IN

•

FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.500 INCHES NOMINAL IN

•

FIRST LEG HOLE DIAMETER: 0.129 INCHES MINIMUM AND 0.134 INCHES MAXIMUM IN

•

FIRST LEG ANGLE: 90.0 DEGREES NOMINAL

•

CENTER SECTION THICKNESS: 0.050 INCHES NOMINAL IN

•

FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH: 0.500 INCHES NOMINAL IN

•

SECOND LEG RELATIONSHIP TO FIRST LEG: NOT IDENTICAL

•

SECOND LEG ANGLE: 90.0 DEGREES NOMINAL

TECHNICAL CHARACTERISTICS

SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH	0.500 INCHES NOMINAL IN
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH	0.500 INCHES NOMINAL IN
FIRST LEG HOLE DIAMETER	0.129 INCHES MINIMUM AND 0.134 INCHES MAXIMUM IN
FIRST LEG ANGLE	90.0 DEGREES NOMINAL
CENTER SECTION THICKNESS	0.050 INCHES NOMINAL IN
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH	0.500 INCHES NOMINAL IN
SECOND LEG RELATIONSHIP TO FIRST LEG	NOT IDENTICAL
SECOND LEG ANGLE	90.0 DEGREES NOMINAL
SECOND LEG HOLE DIAMETER	0.220 INCHES MINIMUM AND 0.230 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-P-23377 MIL SPEC 1ST TREATMENT RESPONSE AND MIL-C-5541 MIL SPEC 2ND TREATMENT RESPONSE

OTHER ITEMS IN FSC 5340 — Hardware, Commercial

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275

SUBSTITUTES & CROSS-REFERENCES 1

9M672C1LSame NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandDemilitarization required — critical (Q)

Ready to buy 10113003?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 10113003?

10113003 is a BRACKET,DOUBLE ANGLE.

What parts can replace 10113003?

There is 1 known substitute for 10113003: 9M672C1L. Substitute compatibility should be verified for your specific system.

What is the NSN for 10113003?

10113003 is cataloged in the U.S. Government catalog under NSN 5340-01-237-4215. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

10113003 — BRACKET,DOUBLE ANGLE

Request a Quote — 10113003