PartsTable
Technical Data Sheet
Download PDF

10112940 — BRACKET,ANGLE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

10112940: BRACKET,ANGLE.

The BRACKET,ANGLE is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 2024, first_leg_angle: 90.0 DEGREES NOMINAL, first_leg_style: CORNER RADIUS, first_leg_width: 1.480 INCHES MINIMUM AND 1.520 INCHES MAXIMUM IN, first_leg_length: 0.750 INCHES MINIMUM AND 0.780 INCHES MAXIMUM IN, second_leg_style: CORNER RADIUS. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-191-2560, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10112940
NSN: 5340-01-191-2560
FSC: 5340 — Hardware, Commercial
CAGE: A486G — NIMIKKEISTOKESKUS NCB FINLAND (FIN)
SPECIFICATIONS
materialALUMINUM ALLOY 2024
first_leg_angle90.0 DEGREES NOMINAL
first_leg_styleCORNER RADIUS
first_leg_width1.480 INCHES MINIMUM AND 1.520 INCHES MAXIMUM IN
first_leg_length0.750 INCHES MINIMUM AND 0.780 INCHES MAXIMUM IN
second_leg_styleCORNER RADIUS
second_leg_width1.480 INCHES MINIMUM AND 1.520 INCHES MAXIMUM IN
style_designatorANGLE
second_leg_length1.000 INCHES MINIMUM AND 1.030 INCHES MAXIMUM IN
surface_treatmentPRIMER
mounting_hole_typePLAIN
first_leg_thickness0.063 INCHES NOMINAL IN
NSN5340-01-191-2560
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 10112940 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.250 INCHES NOMINAL IN
•
FIRST LEG ANGLE: 90.0 DEGREES NOMINAL
•
SECOND LEG RELATIONSHIP TO FIRST LEG: NOT IDENTICAL
•
SECOND LEG HOLE DIAMETER: 0.220 INCHES MINIMUM AND 0.230 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-P-23377 MIL SPEC SINGLE TREATMENT RESPONSE
•
FIRST LEG CORNER RADIUS: 0.250 INCHES NOMINAL IN
•
SECOND LEG WIDTH: 1.480 INCHES MINIMUM AND 1.520 INCHES MAXIMUM IN
•
SECOND LEG LENGTH: 1.000 INCHES MINIMUM AND 1.030 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH0.250 INCHES NOMINAL IN
FIRST LEG ANGLE90.0 DEGREES NOMINAL
SECOND LEG RELATIONSHIP TO FIRST LEGNOT IDENTICAL
SECOND LEG HOLE DIAMETER0.220 INCHES MINIMUM AND 0.230 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-P-23377 MIL SPEC SINGLE TREATMENT RESPONSE
FIRST LEG CORNER RADIUS0.250 INCHES NOMINAL IN
SECOND LEG WIDTH1.480 INCHES MINIMUM AND 1.520 INCHES MAXIMUM IN
SECOND LEG LENGTH1.000 INCHES MINIMUM AND 1.030 INCHES MAXIMUM IN
FIRST LEG HOLE ARRANGEMENT STYLENO HOLE
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH0.230 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
9M735-1Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 10112940?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10112940?
10112940 is a BRACKET,ANGLE.
What parts can replace 10112940?
There is 1 known substitute for 10112940: 9M735-1. Substitute compatibility should be verified for your specific system.
What is the NSN for 10112940?
10112940 is cataloged in the U.S. Government catalog under NSN 5340-01-191-2560. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10112940

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.