10112933 — BRACKET,DOUBLE ANGLE

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

10112933: BRACKET,DOUBLE ANGLE.

The BRACKET,DOUBLE ANGLE is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 2024, first_leg_angle: 90.0 DEGREES NOMINAL, first_leg_style: CORNER RADIUS, first_leg_width: 1.500 INCHES NOMINAL IN, first_leg_length: 0.730 INCHES MINIMUM AND 0.770 INCHES MAXIMUM IN, second_leg_angle: 90.0 DEGREES NOMINAL. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-187-9577, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

10112933

NSN: 5340-01-187-9577
FSC: 5340 — Hardware, Commercial
CAGE: A486G — NIMIKKEISTOKESKUS NCB FINLAND (FIN)

SPECIFICATIONS

material	ALUMINUM ALLOY 2024
first_leg_angle	90.0 DEGREES NOMINAL
first_leg_style	CORNER RADIUS
first_leg_width	1.500 INCHES NOMINAL IN
first_leg_length	0.730 INCHES MINIMUM AND 0.770 INCHES MAXIMUM IN
second_leg_angle	90.0 DEGREES NOMINAL
second_leg_style	CORNER RADIUS
second_leg_width	1.500 INCHES NOMINAL IN
style_designator	DOUBLE ANGLE
second_leg_length	0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM IN
surface_treatment	PRIMER
mounting_hole_type	PLAIN
NSN	5340-01-187-9577

COMPONENT DIAGRAM

KEY FEATURES

•

SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.250 INCHES NOMINAL IN

•

FIRST LEG ANGLE: 90.0 DEGREES NOMINAL

•

CENTER SECTION THICKNESS: 0.050 INCHES NOMINAL IN

•

SECOND LEG RELATIONSHIP TO FIRST LEG: NOT IDENTICAL

•

SECOND LEG ANGLE: 90.0 DEGREES NOMINAL

•

SECOND LEG HOLE DIAMETER: 0.220 INCHES MINIMUM AND 0.230 INCHES MAXIMUM IN

•

SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-P-23377 MIL SPEC SINGLE TREATMENT RESPONSE

•

FIRST LEG CORNER RADIUS: 0.250 INCHES NOMINAL IN

TECHNICAL CHARACTERISTICS

SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH	0.250 INCHES NOMINAL IN
FIRST LEG ANGLE	90.0 DEGREES NOMINAL
CENTER SECTION THICKNESS	0.050 INCHES NOMINAL IN
SECOND LEG RELATIONSHIP TO FIRST LEG	NOT IDENTICAL
SECOND LEG ANGLE	90.0 DEGREES NOMINAL
SECOND LEG HOLE DIAMETER	0.220 INCHES MINIMUM AND 0.230 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-P-23377 MIL SPEC SINGLE TREATMENT RESPONSE
FIRST LEG CORNER RADIUS	0.250 INCHES NOMINAL IN
SECOND LEG WIDTH	1.500 INCHES NOMINAL IN
SECOND LEG LENGTH	0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM IN

OTHER ITEMS IN FSC 5340 — Hardware, Commercial

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275

SUBSTITUTES & CROSS-REFERENCES 1

9M672-2Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy 10112933?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 10112933?

10112933 is a BRACKET,DOUBLE ANGLE.

What parts can replace 10112933?

There is 1 known substitute for 10112933: 9M672-2. Substitute compatibility should be verified for your specific system.

What is the NSN for 10112933?

10112933 is cataloged in the U.S. Government catalog under NSN 5340-01-187-9577. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

10112933 — BRACKET,DOUBLE ANGLE

Request a Quote — 10112933