PartsTable
Technical Data Sheet
Download PDF

10112760 — HARNESS,SAFETY,INDUSTRIAL

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

10112760: HARNESS,SAFETY,INDUSTRIAL.

The HARNESS,SAFETY,INDUSTRIAL is a the manufacturer industrial component. Key specifications include material: RUBBER BODY, overall_height: 1.270 INCHES MINIMUM AND 1.290 INCHES MAXIMUM IN, mounting_method: FRICTION, style_designator: THRU-HOLE, base_inside_diameter: 0.630 INCHES MINIMUM AND 0.650 INCHES MAXIMUM IN, fsc_application_data: DRIVE,MECHANICAL,FLAP,LEADING EDGE,WING. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-146-8163, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10112760
NSN: 5340-01-146-8163
NIINs: 011468163, 016921343
FSC: 5340 — Hardware, Commercial
CAGE: A486G — NIMIKKEISTOKESKUS NCB FINLAND (FIN)
SPECIFICATIONS
materialRUBBER BODY
overall_height1.270 INCHES MINIMUM AND 1.290 INCHES MAXIMUM IN
mounting_methodFRICTION
style_designatorTHRU-HOLE
base_inside_diameter0.630 INCHES MINIMUM AND 0.650 INCHES MAXIMUM IN
fsc_application_dataDRIVE,MECHANICAL,FLAP,LEADING EDGE,WING
opening_inside_diameter0.290 INCHES MINIMUM AND 0.300 INCHES MAXIMUM IN
material_document_and_classificationMIL-R-25988,TYPE 2,CLASS 2,GRADE 50 MIL SPEC SINGLE MATERIAL RESPONSE BODY
NSN5340-01-146-8163
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 10112760 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FSC APPLICATION DATA: DRIVE,MECHANICAL,FLAP,LEADING EDGE,WING
•
OPENING INSIDE DIAMETER: 0.290 INCHES MINIMUM AND 0.300 INCHES MAXIMUM IN
•
MOUNTING METHOD: FRICTION
•
STYLE DESIGNATOR: THRU-HOLE
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-R-25988,TYPE 2,CLASS 2,GRADE 50 MIL SPEC SINGLE MATERIAL RESPONSE BODY
•
BASE INSIDE DIAMETER: 0.630 INCHES MINIMUM AND 0.650 INCHES MAXIMUM IN
•
MATERIAL: RUBBER BODY
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT1.270 INCHES MINIMUM AND 1.290 INCHES MAXIMUM IN
FSC APPLICATION DATADRIVE,MECHANICAL,FLAP,LEADING EDGE,WING
OPENING INSIDE DIAMETER0.290 INCHES MINIMUM AND 0.300 INCHES MAXIMUM IN
MOUNTING METHODFRICTION
STYLE DESIGNATORTHRU-HOLE
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-R-25988,TYPE 2,CLASS 2,GRADE 50 MIL SPEC SINGLE MATERIAL RESPONSE BODY
BASE INSIDE DIAMETER0.630 INCHES MINIMUM AND 0.650 INCHES MAXIMUM IN
MATERIALRUBBER BODY
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 10112760?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10112760?
10112760 is a HARNESS,SAFETY,INDUSTRIAL.
What is the NSN for 10112760?
10112760 is cataloged in the U.S. Government catalog under NSN 5340-01-146-8163. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10112760

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.