PartsTable
Technical Data Sheet
Download PDF

10112615 — CLEVIS,ROD END

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

10112615: CLEVIS,ROD END.

The CLEVIS,ROD END is a the manufacturer industrial component. Key specifications include material: STEEL COMP 4130 OVERALL, end_radius: 0.438 INCHES NOMINAL IN, shank_length: 0.800 INCHES NOMINAL IN, thread_class: 3A ROD CONNECTION A, thread_length: 0.550 INCHES NOMINAL ROD CONNECTION IN, shank_diameter: 0.250 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-132-1238, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10112615
NSN: 5340-01-132-1238
FSC: 5340 — Hardware, Commercial
CAGE: A486G — NIMIKKEISTOKESKUS NCB FINLAND (FIN)
SPECIFICATIONS
materialSTEEL COMP 4130 OVERALL
end_radius0.438 INCHES NOMINAL IN
shank_length0.800 INCHES NOMINAL IN
thread_class3A ROD CONNECTION A
thread_length0.550 INCHES NOMINAL ROD CONNECTION IN
shank_diameter0.250 INCHES NOMINAL IN
fork_span_width0.540 INCHES MINIMUM AND 0.550 INCHES MAXIMUM IN
overall_diameter0.875 INCHES NOMINAL IN
style_designatorCLEVIS
thread_directionRIGHT-HAND ROD CONNECTION
fork_arm_thickness0.550 INCHES NOMINAL IN
nominal_thread_size0.250 INCHES ROD CONNECTION IN
NSN5340-01-132-1238
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 10112615 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SHANK DIAMETER: 0.250 INCHES NOMINAL IN
•
FORK SPAN WIDTH: 0.540 INCHES MINIMUM AND 0.550 INCHES MAXIMUM IN
•
SECURING PIN HOLE DIAMETER: 0.070 INCHES MINIMUM AND 0.075 INCHES MAXIMUM IN
•
FORK ARM THICKNESS: 0.550 INCHES NOMINAL IN
•
OVERALL DIAMETER: 0.875 INCHES NOMINAL IN
•
END RADIUS: 0.438 INCHES NOMINAL IN
•
THREAD LENGTH: 0.550 INCHES NOMINAL ROD CONNECTION IN
•
SHANK LENGTH: 0.800 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
SHANK DIAMETER0.250 INCHES NOMINAL IN
FORK SPAN WIDTH0.540 INCHES MINIMUM AND 0.550 INCHES MAXIMUM IN
SECURING PIN HOLE DIAMETER0.070 INCHES MINIMUM AND 0.075 INCHES MAXIMUM IN
FORK ARM THICKNESS0.550 INCHES NOMINAL IN
OVERALL DIAMETER0.875 INCHES NOMINAL IN
END RADIUS0.438 INCHES NOMINAL IN
THREAD LENGTH0.550 INCHES NOMINAL ROD CONNECTION IN
SHANK LENGTH0.800 INCHES NOMINAL IN
STYLE DESIGNATORCLEVIS
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-6758,COND D MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
74A731126-2001Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusActive· U.S. Government catalog
Demilitarization required — critical (Q)
Ready to buy 10112615?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10112615?
10112615 is a CLEVIS,ROD END.
What parts can replace 10112615?
There is 1 known substitute for 10112615: 74A731126-2001. Substitute compatibility should be verified for your specific system.
What is the NSN for 10112615?
10112615 is cataloged in the U.S. Government catalog under NSN 5340-01-132-1238. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10112615