Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
SEAT,HELICAL COMPRESSION SPRING. Key specifications include material: STEEL COMP 416, design_type: SOLID, end_diameter: 0.5230 INCHES MINIMUM AND 0.5280 INCHES MAXIMUM IN, bore_diameter: 0.0930 INCHES NOMINAL IN, overall_height: 0.7410 INCHES NOMINAL IN, special_features: NOT CASEHARDENED. This product is currently in active production with full OEM support.
This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-129-8517, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
10112549
NSN:5340-01-129-8517 FSC:5340 CAGE:A486G — NIMIKKEISTOKESKUS NCB FINLAND (FIN)
SPECIFICATIONS
material
STEEL COMP 416
design_type
SOLID
end_diameter
0.5230 INCHES MINIMUM AND 0.5280 INCHES MAXIMUM IN
bore_diameter
0.0930 INCHES NOMINAL IN
overall_height
0.7410 INCHES NOMINAL IN
special_features
NOT CASEHARDENED
style_designator
SEAT
first_step_length
0.6030 INCHES NOMINAL IN
surface_treatment
PASSIVATE
counterbore_length
0.5600 INCHES MINIMUM AND 0.5700 INCHES MAXIMUM IN
first_step_diameter
0.5550 INCHES MINIMUM AND 0.5600 INCHES MAXIMUM IN
chamfer_angle_in_deg
15.0
NSN
5340-01-129-8517
COMPONENT DIAGRAM
KEY FEATURES
•
MATERIAL HARDNESS RATING: 24.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM
•
FIRST STEP LENGTH: 0.6030 INCHES NOMINAL IN
•
DESIGN TYPE: SOLID
•
COUNTERSINK DIAMETER: 0.6000 INCHES MINIMUM AND 0.6050 INCHES MAXIMUM IN
•
FIRST STEP DIAMETER: 0.5550 INCHES MINIMUM AND 0.5600 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A582, TYPE 416 ASSN STD SINGLE MATERIAL RESPONSE
•
STYLE DESIGNATOR: SEAT
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: PS13001, MCDONNELL DOUGLAS CORP MFR REF SINGLE TREATMENT RESPONSE
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL HARDNESS RATING
24.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM
FIRST STEP LENGTH
0.6030 INCHES NOMINAL IN
DESIGN TYPE
SOLID
COUNTERSINK DIAMETER
0.6000 INCHES MINIMUM AND 0.6050 INCHES MAXIMUM IN
FIRST STEP DIAMETER
0.5550 INCHES MINIMUM AND 0.5600 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATION
ASTM A582, TYPE 416 ASSN STD SINGLE MATERIAL RESPONSE
STYLE DESIGNATOR
SEAT
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION
PS13001, MCDONNELL DOUGLAS CORP MFR REF SINGLE TREATMENT RESPONSE
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10112549?
10112549 is a SEAT,HELICAL COMPRESSION SPRING.
What parts can replace 10112549?
There are 4 known substitutes for 10112549: 311WP8, A67-334, A-A-2756 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 10112549?
10112549 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-129-8517. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.