PartsTable
Technical Data Sheet
Download PDF

10112525 — CLAMP,LOOP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

10112525: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.193 INCHES MINIMUM AND 0.201 INCHES MAXIMUM IN, material: STEEL COMP 305 BAND, overall_width: 1.280 INCHES MINIMUM AND 1.340 INCHES MAXIMUM IN, tongue_hole_type: ROUND, UNTHREADED, surface_treatment: PASSIVATE BAND, material_thickness: 0.036 INCHES MINIMUM AND 0.044 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-127-7195, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10112525
NSN: 5340-01-127-7195
FSC: 5340 — Hardware, Commercial
CAGE: A486G — NIMIKKEISTOKESKUS NCB FINLAND (FIN)
SPECIFICATIONS
diameter0.193 INCHES MINIMUM AND 0.201 INCHES MAXIMUM IN
materialSTEEL COMP 305 BAND
overall_width1.280 INCHES MINIMUM AND 1.340 INCHES MAXIMUM IN
tongue_hole_typeROUND, UNTHREADED
surface_treatmentPASSIVATE BAND
material_thickness0.036 INCHES MINIMUM AND 0.044 INCHES MAXIMUM IN
loop_inside_diameter1.500 INCHES NOMINAL IN
fastening_device_typeSTUD TURNLOCK
material_document_and_classificationQQ-S-766 FED SPEC SINGLE MATERIAL RESPONSE BAND
distance_from_loop_center_to_tongue_end1.570 INCHES NOMINAL IN
surface_treatment_document_and_classificationMIL-S-5002 MIL SPEC SINGLE TREATMENT RESPONSE BAND
center_to_center_distance_between_loop_and_mounting_hole1.030 INCHES MINIMUM AND 1.070 INCHES MAXIMUM IN
NSN5340-01-127-7195
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 10112525 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-S-5002 MIL SPEC SINGLE TREATMENT RESPONSE BAND
•
FASTENING DEVICE TYPE: STUD TURNLOCK
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-766 FED SPEC SINGLE MATERIAL RESPONSE BAND
•
DIAMETER: 0.193 INCHES MINIMUM AND 0.201 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.036 INCHES MINIMUM AND 0.044 INCHES MAXIMUM IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 1.570 INCHES NOMINAL IN
•
SURFACE TREATMENT: PASSIVATE BAND
TECHNICAL CHARACTERISTICS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-S-5002 MIL SPEC SINGLE TREATMENT RESPONSE BAND
FASTENING DEVICE TYPESTUD TURNLOCK
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-766 FED SPEC SINGLE MATERIAL RESPONSE BAND
DIAMETER0.193 INCHES MINIMUM AND 0.201 INCHES MAXIMUM IN
OVERALL WIDTH1.280 INCHES MINIMUM AND 1.340 INCHES MAXIMUM IN
MATERIAL THICKNESS0.036 INCHES MINIMUM AND 0.044 INCHES MAXIMUM IN
DISTANCE FROM LOOP CENTER TO TONGUE END1.570 INCHES NOMINAL IN
SURFACE TREATMENTPASSIVATE BAND
TONGUE HOLE TYPEROUND, UNTHREADED
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE1.030 INCHES MINIMUM AND 1.070 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 2
ST9M427W24Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
7C34-24-2ASame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 10112525?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10112525?
10112525 is a CLAMP,LOOP.
What parts can replace 10112525?
There are 2 known substitutes for 10112525: ST9M427W24, 7C34-24-2A. Substitute compatibility should be verified for your specific system.
What is the NSN for 10112525?
10112525 is cataloged in the U.S. Government catalog under NSN 5340-01-127-7195. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10112525

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.