PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 101125-X000
101125-X000 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC CUSHION, overall_width: 1.656 INCHES NOMINAL IN, loop_inside_diameter: 1.000 INCHES NOMINAL IN, cushioning_environmental_protection: FUEL, AROMATIC AND HEAT AND OIL RESISTANT, distance_from_loop_center_to_tongue_end: 0.656 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-126-0611, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
101125-X000
NSN: 5340-01-126-0611
FSC: 5340
CAGE: 55017 — HYDRA-ZORB CO (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC CUSHION
overall_width1.656 INCHES NOMINAL IN
loop_inside_diameter1.000 INCHES NOMINAL IN
cushioning_environmental_protectionFUEL, AROMATIC AND HEAT AND OIL RESISTANT
distance_from_loop_center_to_tongue_end0.656 INCHES NOMINAL IN
NSN5340-01-126-0611
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 101125-X000 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CUSHIONING ENVIRONMENTAL PROTECTION: FUEL, AROMATIC AND HEAT AND OIL RESISTANT
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 0.656 INCHES NOMINAL IN
•
LOOP INSIDE DIAMETER: 1.000 INCHES NOMINAL IN
•
MATERIAL: STEEL CORROSION RESISTING BAND
TECHNICAL CHARACTERISTICS (FLIS)
CUSHIONING ENVIRONMENTAL PROTECTIONFUEL, AROMATIC AND HEAT AND OIL RESISTANT
DISTANCE FROM LOOP CENTER TO TONGUE END0.656 INCHES NOMINAL IN
LOOP INSIDE DIAMETER1.000 INCHES NOMINAL IN
OVERALL WIDTH1.656 INCHES NOMINAL IN
MATERIALSTEEL CORROSION RESISTING BAND
MATERIALRUBBER SYNTHETIC CUSHION
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
500P-.125 DIA NInterchangeable
interchangeable cross-reference
interchangeable
101-125Interchangeable
interchangeable cross-reference
interchangeable
8215930Interchangeable
interchangeable cross-reference
interchangeable
CT24AInterchangeable
interchangeable cross-reference
interchangeable
CT24CInterchangeable
interchangeable cross-reference
interchangeable
100-3912Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 101125-X000?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 101125-X000?
101125-X000 is a CLAMP,LOOP.
What parts can replace 101125-X000?
There are 10 known substitutes for 101125-X000: 500P-.125 DIA N, 101-125, 8215930 and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 101125-X000?
101125-X000 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-126-0611. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 101125-X000

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026