PartsTable
Technical Data Sheet
Download PDF

10112499 — BUMPER

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

10112499: BUMPER.

The BUMPER is a the manufacturer industrial component. Key specifications include material: RUBBER, hole_diameter: 0.630 INCHES MINIMUM AND 0.660 INCHES MAXIMUM IN, overall_width: 1.090 INCHES NOMINAL IN, overall_height: 0.750 INCHES NOMINAL IN, overall_length: 2.800 INCHES NOMINAL IN, material_document_and_classification: MIL-R-25988, TYPE 2, CLASS 1, GRADE 70 MIL SPEC SINGLE MATERIAL RESPONSE. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-126-5477, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10112499
NSN: 5340-01-126-5477
FSC: 5340 — Hardware, Commercial
CAGE: A486G — NIMIKKEISTOKESKUS NCB FINLAND (FIN)
SPECIFICATIONS
materialRUBBER
hole_diameter0.630 INCHES MINIMUM AND 0.660 INCHES MAXIMUM IN
overall_width1.090 INCHES NOMINAL IN
overall_height0.750 INCHES NOMINAL IN
overall_length2.800 INCHES NOMINAL IN
material_document_and_classificationMIL-R-25988, TYPE 2, CLASS 1, GRADE 70 MIL SPEC SINGLE MATERIAL RESPONSE
NSN5340-01-126-5477
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 10112499 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-R-25988, TYPE 2, CLASS 1, GRADE 70 MIL SPEC SINGLE MATERIAL RESPONSE
•
MATERIAL: RUBBER
•
HOLE DIAMETER: 0.630 INCHES MINIMUM AND 0.660 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.750 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-R-25988, TYPE 2, CLASS 1, GRADE 70 MIL SPEC SINGLE MATERIAL RESPONSE
OVERALL LENGTH2.800 INCHES NOMINAL IN
OVERALL WIDTH1.090 INCHES NOMINAL IN
MATERIALRUBBER
HOLE DIAMETER0.630 INCHES MINIMUM AND 0.660 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Terminal item — no further procurement; issued until stock is exhaustedNo demilitarization required
Ready to buy 10112499?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10112499?
10112499 is a BUMPER.
What is the NSN for 10112499?
10112499 is cataloged in the U.S. Government catalog under NSN 5340-01-126-5477. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10112499

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.