PartsTable
Technical Data Sheet
Download PDF

10112417 — RETAINER,NUT AND BOLT

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

10112417: RETAINER,NUT AND BOLT.

The RETAINER,NUT AND BOLT is a the manufacturer industrial component. Key specifications include material: STEEL COMP 630, overall_width: 3.040 INCHES NOMINAL IN, overall_height: 0.750 INCHES NOMINAL IN, overall_length: 5.030 INCHES NOMINAL IN, material_thickness: 0.250 INCHES NOMINAL IN, mounting_hole_diameter: 0.281 INCHES MINIMUM AND 0.288 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-121-3018, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10112417
NSN: 5340-01-121-3018
FSC: 5340 — Hardware, Commercial
CAGE: A486G — NIMIKKEISTOKESKUS NCB FINLAND (FIN)
SPECIFICATIONS
materialSTEEL COMP 630
overall_width3.040 INCHES NOMINAL IN
overall_height0.750 INCHES NOMINAL IN
overall_length5.030 INCHES NOMINAL IN
material_thickness0.250 INCHES NOMINAL IN
mounting_hole_diameter0.281 INCHES MINIMUM AND 0.288 INCHES MAXIMUM IN
end_item_identificationW/S: AIRCRAFT, HORNET F/A-18
criticality_code_justificationBWQY
material_document_and_classificationAMS 5643 ASSN STD SINGLE MATERIAL RESPONSE
center_to_center_distance_between_cup_and_mounting_hole3.130 INCHES NOMINAL IN
NSN5340-01-121-3018
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 10112417 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CRITICALITY CODE JUSTIFICATION: BWQY
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5643 ASSN STD SINGLE MATERIAL RESPONSE
•
MOUNTING HOLE DIAMETER: 0.281 INCHES MINIMUM AND 0.288 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.250 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN CUP AND MOUNTING HOLE: 3.130 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.750 INCHES NOMINAL IN
CRITICALITY CODE JUSTIFICATIONBWQY
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5643 ASSN STD SINGLE MATERIAL RESPONSE
MOUNTING HOLE DIAMETER0.281 INCHES MINIMUM AND 0.288 INCHES MAXIMUM IN
OVERALL LENGTH5.030 INCHES NOMINAL IN
OVERALL WIDTH3.040 INCHES NOMINAL IN
MATERIAL THICKNESS0.250 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN CUP AND MOUNTING HOLE3.130 INCHES NOMINAL IN
END ITEM IDENTIFICATIONW/S: AIRCRAFT, HORNET F/A-18
MATERIALSTEEL COMP 630
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
74A410694-2003Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 10112417?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10112417?
10112417 is a RETAINER,NUT AND BOLT.
What parts can replace 10112417?
There is 1 known substitute for 10112417: 74A410694-2003. Substitute compatibility should be verified for your specific system.
What is the NSN for 10112417?
10112417 is cataloged in the U.S. Government catalog under NSN 5340-01-121-3018. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10112417

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.