PartsTable
Technical Data Sheet
Download PDF

10112403 — CLEVIS,ROD END

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

10112403: CLEVIS,ROD END.

The CLEVIS,ROD END is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, end_radius: 0.125 INCHES NOMINAL IN, fork_depth: 0.110 INCHES NOMINAL IN, hole_diameter: 0.125 INCHES NOMINAL IN, overall_width: 0.760 INCHES NOMINAL IN, shank_diameter: 0.500 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-120-8344, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10112403
NSN: 5340-01-120-8344
FSC: 5340 — Hardware, Commercial
CAGE: A486G — NIMIKKEISTOKESKUS NCB FINLAND (FIN)
SPECIFICATIONS
materialSTEEL OVERALL
end_radius0.125 INCHES NOMINAL IN
fork_depth0.110 INCHES NOMINAL IN
hole_diameter0.125 INCHES NOMINAL IN
overall_width0.760 INCHES NOMINAL IN
shank_diameter0.500 INCHES NOMINAL IN
fork_span_width0.500 INCHES NOMINAL IN
overall_diameter0.320 INCHES NOMINAL IN
special_featuresTWO 0.112 IN. W BY 0.430 IN. DP PIVOT SLOTTED HOLES; THRU HOLE 0.315 IN. MIN,0.319 IN. MAX ON ROD CONNECTION END IN
style_designatorCLEVIS
fork_arm_thickness0.130 INCHES NOMINAL IN
metallic_hardness_rating33.0 MINIMUM ROCKWELL C AND 38.0 MAXIMUM ROCKWELL C
NSN5340-01-120-8344
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 10112403 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SHANK DIAMETER: 0.500 INCHES NOMINAL IN
•
FORK SPAN WIDTH: 0.500 INCHES NOMINAL IN
•
SECURING PIN HOLE DIAMETER: 0.125 INCHES NOMINAL IN
•
FORK ARM THICKNESS: 0.130 INCHES NOMINAL IN
•
OVERALL DIAMETER: 0.320 INCHES NOMINAL IN
•
END RADIUS: 0.125 INCHES NOMINAL IN
•
STYLE DESIGNATOR: CLEVIS
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-81591,COMP 1C-17-4 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
TECHNICAL CHARACTERISTICS
SHANK DIAMETER0.500 INCHES NOMINAL IN
FORK SPAN WIDTH0.500 INCHES NOMINAL IN
SECURING PIN HOLE DIAMETER0.125 INCHES NOMINAL IN
FORK ARM THICKNESS0.130 INCHES NOMINAL IN
OVERALL DIAMETER0.320 INCHES NOMINAL IN
END RADIUS0.125 INCHES NOMINAL IN
STYLE DESIGNATORCLEVIS
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-81591,COMP 1C-17-4 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
OVERALL WIDTH0.760 INCHES NOMINAL IN
SPECIAL FEATURESTWO 0.112 IN. W BY 0.430 IN. DP PIVOT SLOTTED HOLES; THRU HOLE 0.315 IN. MIN,0.319 IN. MAX ON ROD CONNECTION END IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandDemilitarization required — critical (Q)
Ready to buy 10112403?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10112403?
10112403 is a CLEVIS,ROD END.
What is the NSN for 10112403?
10112403 is cataloged in the U.S. Government catalog under NSN 5340-01-120-8344. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10112403