10111200: HOSE ASSEMBLY,NONMETALLIC.
The HOSE ASSEMBLY,NONMETALLIC is a the manufacturer industrial component. Key specifications include flow_angle: 45.0 DEGREES FIRST END, seat_angle: 8.5 DEGREES FIRST END, temp_rating: -65.0 FAHRENHEIT AND 400.0 FAHRENHEIT SINGLE RESPONSE DEGF, thread_class: 3B SECOND END, connection_type: THREADED INTERNAL TUBE FIRST END, inside_diameter: 0.688 INCHES NOMINAL IN. This part is cataloged in the U.S.
Government catalog under NSN 4720-01-146-7930, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
| flow_angle | 45.0 DEGREES FIRST END |
| seat_angle | 8.5 DEGREES FIRST END |
| temp_rating | -65.0 FAHRENHEIT AND 400.0 FAHRENHEIT SINGLE RESPONSE DEGF |
| thread_class | 3B SECOND END |
| connection_type | THREADED INTERNAL TUBE FIRST END |
| inside_diameter | 0.688 INCHES NOMINAL IN |
| connection_style | SWIVEL NUT, INVERTED FLARE FIRST END |
| outside_diameter | 1.062 INCHES NOMINAL IN |
| special_features | INNER CONVEYING TUBE MATERIAL-PLASTIC, POLYTETRAFLUOROETHYLENE |
| thread_direction | RIGHT-HAND FIRST END |
| operating_pressure | 3000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS |
| burst_test_pressure | 12000.0 POUNDS PER SQUARE INCH LBS |
| NSN | 4720-01-146-7930 |
| FLOW ANGLE | 45.0 DEGREES FIRST END |
| MEASURING METHOD AND LENGTH | 11.949 INCHES NOMINAL WORKING IN |
| TEMP RATING | -65.0 FAHRENHEIT AND 400.0 FAHRENHEIT SINGLE RESPONSE DEGF |
| MINIMUM INSIDE BENDING RADIUS | 7.750 INCHES IN |
| CONNECTION STYLE | SWIVEL NUT, INVERTED FLARE SECOND END |
| CONNECTION STYLE | SWIVEL NUT, INVERTED FLARE FIRST END |
| END CONNECTION DESIGN | ELBOW SECOND END |
| END CONNECTION DESIGN | ELBOW FIRST END |
| SUPPLEMENTARY FEATURES | THIS ITEM HAS BEEN REVIEWED FOR ASBESTOS MATERIAL. THE CURRENT APPROVED SOURCES (RNVC 2) HAVE INDICATED THEIR PART NUMBERS CONTAINED ASBESTOS. THE CONTINUE TO MANUFACTURE THE SAME NUMBER WITHOUT ASBESTOS MATERIAL |
| LAYER COMPOSITION AND LOCATION | 1ST LAYER SPIRALLY LAID CORROSION RESISTANT STEEL WIRE AND 2ND LAYER SPIRALLY LAID CORROSION RESISTANT STEEL WIRE AND 3RD LAYER SPIRALLY LAID CORROSION RESISTANT STEEL WIRE AND 4TH LAYER SPIRALLY LAID CORROSION RESISTANT STEEL WIRE AND OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |