10110463: HOUSING,BEARING UNIT.
The HOUSING,BEARING UNIT is a the manufacturer industrial component. Key specifications include bore_diameter: 0.8750 INCHES NOMINAL IN, housing_height: 1.8760 INCHES NOMINAL IN, housing_length: 0.3240 INCHES MINIMUM AND 0.3440 INCHES MAXIMUM IN, shaft_end_type: OPEN, flange_thickness: 0.0580 INCHES MINIMUM AND 0.0680 INCHES MAXIMUM IN, housing_diameter: 1.7180 INCHES NOMINAL IN. This part is cataloged in the U.S.
Government catalog under NSN 3130-01-133-5965, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
| bore_diameter | 0.8750 INCHES NOMINAL IN |
| housing_height | 1.8760 INCHES NOMINAL IN |
| housing_length | 0.3240 INCHES MINIMUM AND 0.3440 INCHES MAXIMUM IN |
| shaft_end_type | OPEN |
| flange_thickness | 0.0580 INCHES MINIMUM AND 0.0680 INCHES MAXIMUM IN |
| housing_diameter | 1.7180 INCHES NOMINAL IN |
| special_features | TIN PLATE,MIL-T-10727,TYPE 1,0.0003 IN. MIN,0.0005 IN. MAX THK; FLAT SPOT AT ONE POINT ON HOUSING OD IN |
| style_designator | FLANGE BLOCK |
| bolt_circle_diameter | 1.8920 INCHES NOMINAL IN |
| mounting_hole_diameter | 0.1230 INCHES MINIMUM AND 0.1280 INCHES MAXIMUM IN |
| overall_outside_diameter | 2.1420 INCHES NOMINAL IN |
| height_from_bottom_of_base_to_bore_centerline | 1.0710 INCHES NOMINAL IN |
| NSN | 3130-01-133-5965 |
| HOUSING HEIGHT | 1.8760 INCHES NOMINAL IN |
| FLANGE THICKNESS | 0.0580 INCHES MINIMUM AND 0.0680 INCHES MAXIMUM IN |
| STYLE DESIGNATOR | FLANGE BLOCK |
| MOUNTING HOLE DIAMETER | 0.1230 INCHES MINIMUM AND 0.1280 INCHES MAXIMUM IN |
| OVERALL OUTSIDE DIAMETER | 2.1420 INCHES NOMINAL IN |
| BOLT CIRCLE DIAMETER | 1.8920 INCHES NOMINAL IN |
| SHAFT END TYPE | OPEN |
| SPECIAL FEATURES | TIN PLATE,MIL-T-10727,TYPE 1,0.0003 IN. MIN,0.0005 IN. MAX THK; FLAT SPOT AT ONE POINT ON HOUSING OD IN |
| TEST DATA DOCUMENT | 76301-PS21201,CLASS C SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| BORE DIAMETER | 0.8750 INCHES NOMINAL IN |
No substitute or cross-reference records for this part.