10110234 — WASHER,RECESSED

✓ Government record, cited

— · NUT WASHER

PRODUCT OVERVIEW

10110234: WASHER,RECESSED.

The WASHER,RECESSED is a the manufacturer industrial component. Key specifications include material: STEEL COMP 4340 OVERALL, outside_diameter: 1.090 INCHES MINIMUM AND 1.150 INCHES MAXIMUM IN, special_features: SERATION SURFACE 0.31 IN DEEP,0.63 PITCH,CUT AT 90 DEGREE ANGLE IN, style_designator: RECESSED BOTH SIDES, top_recess_angle: 45.0 DEGREES NOMINAL, bottom_recess_angle: 45.0 DEGREES NOMINAL. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-260-1819, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

10110234

NSN: 5310-01-260-1819
FSC: 5310 — Nuts and Washers
CAGE: A486G — NIMIKKEISTOKESKUS NCB FINLAND (FIN)

SPECIFICATIONS

material	STEEL COMP 4340 OVERALL
outside_diameter	1.090 INCHES MINIMUM AND 1.150 INCHES MAXIMUM IN
special_features	SERATION SURFACE 0.31 IN DEEP,0.63 PITCH,CUT AT 90 DEGREE ANGLE IN
style_designator	RECESSED BOTH SIDES
top_recess_angle	45.0 DEGREES NOMINAL
bottom_recess_angle	45.0 DEGREES NOMINAL
material_document_and_classification	MIL-S-8844,CLASS 1,COND E2 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN	5310-01-260-1819

COMPONENT DIAGRAM

KEY FEATURES

•

TOP RECESS ANGLE: 45.0 DEGREES NOMINAL

•

STYLE DESIGNATOR: RECESSED BOTH SIDES

•

MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-8844,CLASS 1,COND E2 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL

•

OUTSIDE DIAMETER: 1.090 INCHES MINIMUM AND 1.150 INCHES MAXIMUM IN

•

BOTTOM RECESS ANGLE: 45.0 DEGREES NOMINAL

•

MATERIAL: STEEL COMP 4340 OVERALL

TECHNICAL CHARACTERISTICS

TOP RECESS ANGLE	45.0 DEGREES NOMINAL
STYLE DESIGNATOR	RECESSED BOTH SIDES
MATERIAL DOCUMENT AND CLASSIFICATION	MIL-S-8844,CLASS 1,COND E2 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
OUTSIDE DIAMETER	1.090 INCHES MINIMUM AND 1.150 INCHES MAXIMUM IN
BOTTOM RECESS ANGLE	45.0 DEGREES NOMINAL
SPECIAL FEATURES	SERATION SURFACE 0.31 IN DEEP,0.63 PITCH,CUT AT 90 DEGREE ANGLE IN
MATERIAL	STEEL COMP 4340 OVERALL

OTHER ITEMS IN FSC 5310 — Nuts and Washers

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540

SUBSTITUTES & CROSS-REFERENCES 1

74A410567-2003Reference document

Same NSN cross-reference

Reference document — Vendor item drawing reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy 10110234?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 10110234?

10110234 is a WASHER,RECESSED.

What parts can replace 10110234?

There is 1 known substitute for 10110234: 74A410567-2003. Substitute compatibility should be verified for your specific system.

What is the NSN for 10110234?

10110234 is cataloged in the U.S. Government catalog under NSN 5310-01-260-1819. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

10110234 — WASHER,RECESSED

Request a Quote — 10110234