PartsTable
Technical Data Sheet
Download PDF

10110169 — NUT,SELF-LOCKING,ASSEMBLED WASHE

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

10110169: NUT,SELF-LOCKING,ASSEMBLED WASHE.

NUT,SELF-LOCKING,ASSEMBLED WASHE. Key specifications include material: IRON ALLOY 660 OVERALL, nut_style: FLAT WITH TURNED UP EDGE, lubrication: DRY FILM LUBRICANT, thread_class: 3B, thread_series: UNIFIED NATIONAL JOINT FINE (UNJF), overall_height: 0.687 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-216-7897, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10110169
NSN: 5310-01-216-7897
FSC: 5310 — Nuts and Washers
CAGE: A486G — NIMIKKEISTOKESKUS NCB FINLAND (FIN)
SPECIFICATIONS
materialIRON ALLOY 660 OVERALL
nut_styleFLAT WITH TURNED UP EDGE
lubricationDRY FILM LUBRICANT
thread_class3B
thread_seriesUNIFIED NATIONAL JOINT FINE (UNJF)
overall_height0.687 INCHES MAXIMUM IN
locking_featurePREVAILING TORQUE ALL METAL DESIGN
special_featuresDOUBLE HEXAGON
thread_directionRIGHT-HAND
width_across_flats0.741 INCHES MINIMUM AND 0.752 INCHES MAXIMUM IN
nominal_thread_size0.625 INCHES IN
washer_outside_diameter0.940 INCHES MINIMUM IN
NSN5310-01-216-7897
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 10110169 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LUBRICATION: DRY FILM LUBRICANT
•
WASHER OUTSIDE DIAMETER: 0.940 INCHES MINIMUM IN
•
WIDTH ACROSS FLATS: 0.741 INCHES MINIMUM AND 0.752 INCHES MAXIMUM IN
•
THREAD SERIES: UNIFIED NATIONAL JOINT FINE (UNJF)
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5732 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.625 INCHES IN
TECHNICAL CHARACTERISTICS
LUBRICATIONDRY FILM LUBRICANT
OVERALL HEIGHT0.687 INCHES MAXIMUM IN
WASHER OUTSIDE DIAMETER0.940 INCHES MINIMUM IN
WIDTH ACROSS FLATS0.741 INCHES MINIMUM AND 0.752 INCHES MAXIMUM IN
THREAD SERIESUNIFIED NATIONAL JOINT FINE (UNJF)
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5732 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.625 INCHES IN
LOCKING FEATUREPREVAILING TORQUE ALL METAL DESIGN
SPECIAL FEATURESDOUBLE HEXAGON
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES 3
3M1084-10Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
82719-101BReference document
Same NSN cross-reference
Reference document — Secondary reference
HW52408-10Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 10110169?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10110169?
10110169 is a NUT,SELF-LOCKING,ASSEMBLED WASHE.
What parts can replace 10110169?
There are 3 known substitutes for 10110169: 3M1084-10, 82719-101B, HW52408-10. Substitute compatibility should be verified for your specific system.
What is the NSN for 10110169?
10110169 is cataloged in the U.S. Government catalog under NSN 5310-01-216-7897. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10110169

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.