PartsTable
Technical Data Sheet
Download PDF

10110121 — WASHER,FLAT

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

10110121: WASHER,FLAT.

The WASHER,FLAT is a the manufacturer industrial component. Key specifications include material: STEEL COMP 302 OR STEEL COMP 304 OVERALL, thickness: 0.029 INCHES MINIMUM AND 0.035 INCHES MAXIMUM IN, hole_diameter: 0.191 INCHES MINIMUM AND 0.201 INCHES MAXIMUM IN, overall_diameter: 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN, surface_treatment: PASSIVATE OVERALL, peripheral_shape_style: ROUND. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-194-0698, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10110121
NSN: 5310-01-194-0698
FSC: 5310 — Nuts and Washers
CAGE: A486G — NIMIKKEISTOKESKUS NCB FINLAND (FIN)
SPECIFICATIONS
materialSTEEL COMP 302 OR STEEL COMP 304 OVERALL
thickness0.029 INCHES MINIMUM AND 0.035 INCHES MAXIMUM IN
hole_diameter0.191 INCHES MINIMUM AND 0.201 INCHES MAXIMUM IN
overall_diameter0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
surface_treatmentPASSIVATE OVERALL
peripheral_shape_styleROUND
center_hole_shape_styleROUND
cross-sectional_shape_styleRECTANGULAR
material_document_and_classificationMIL-S-5059 MIL SPEC 1ST MATERIAL RESPONSE OR QQ-S-763 FED SPEC 1ST MATERIAL RESPONSE OR MIL-T-8506,TYPE I ANNEALED MIL SPEC 2ND MATERIAL RESPONSE OVERALL
surface_treatment_document_and_classificationQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5310-01-194-0698
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 10110121 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
OVERALL DIAMETER: 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5059 MIL SPEC 1ST MATERIAL RESPONSE OR QQ-S-763 FED SPEC 1ST MATERIAL RESPONSE OR MIL-T-8506,TYPE I ANNEALED MIL SPEC 2ND MATERIAL RESPONSE OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR
•
SURFACE TREATMENT: PASSIVATE OVERALL
•
PERIPHERAL SHAPE STYLE: ROUND
•
MATERIAL: STEEL COMP 302 OR STEEL COMP 304 OVERALL
•
CENTER HOLE SHAPE STYLE: ROUND
TECHNICAL CHARACTERISTICS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
OVERALL DIAMETER0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-5059 MIL SPEC 1ST MATERIAL RESPONSE OR QQ-S-763 FED SPEC 1ST MATERIAL RESPONSE OR MIL-T-8506,TYPE I ANNEALED MIL SPEC 2ND MATERIAL RESPONSE OVERALL
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
SURFACE TREATMENTPASSIVATE OVERALL
PERIPHERAL SHAPE STYLEROUND
MATERIALSTEEL COMP 302 OR STEEL COMP 304 OVERALL
CENTER HOLE SHAPE STYLEROUND
HOLE DIAMETER0.191 INCHES MINIMUM AND 0.201 INCHES MAXIMUM IN
THICKNESS0.029 INCHES MINIMUM AND 0.035 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES 1
4M27C6Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 10110121?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10110121?
10110121 is a WASHER,FLAT.
What parts can replace 10110121?
There is 1 known substitute for 10110121: 4M27C6. Substitute compatibility should be verified for your specific system.
What is the NSN for 10110121?
10110121 is cataloged in the U.S. Government catalog under NSN 5310-01-194-0698. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10110121

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.