PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 1010N
1010N ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The TRANSFORMER,POWER is a the manufacturer industrial component. Key specifications include material: IRON OVERALL, flow_angle: 90.0 DEGREES, leg_length: 9.000 INCHES NOMINAL ALL ENDS IN, overall_width: 4.156 INCHES NOMINAL IN, inclosure_type: OPEN, overall_height: 5.594 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-450-4747, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1010N
NSN: 5340-00-450-4747
FSC: 5340
CAGE: 30399 — ILCO UNICAN CORP DBA WOLF SALES (USA)
SPECIFICATIONS
materialIRON OVERALL
flow_angle90.0 DEGREES
leg_length9.000 INCHES NOMINAL ALL ENDS IN
overall_width4.156 INCHES NOMINAL IN
inclosure_typeOPEN
overall_height5.594 INCHES NOMINAL IN
overall_length5.000 INCHES NOMINAL IN
connection_typeUNTHREADED EXTERNAL PIPE ALL ENDS
mounting_methodSLOT SINGLE GROUP
connection_styleGROOVED (PIPE) ALL ENDS
frequency_rating50.0 HERTZ NOMINAL OR 60.0 HERTZ NOMINAL SINGLE COMPONENT
special_features3 ALTERNATE MOUNTING HOLES AT 120 DEGREES FOR 0.250 IN. MOUNTING BOLTS IN
NSN5340-00-450-4747
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 1010N MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
TECHNICAL CHARACTERISTICS (FLIS)
SPECIAL FEATURESBRASS OR NICKEL SILVER
VERIFIED SUBSTITUTES & CROSS-REFERENCES 17
PA2029Interchangeable
interchangeable cross-reference
interchangeable
AMS-QQ-A-200/3Interchangeable
interchangeable cross-reference
interchangeable
22601Interchangeable
interchangeable cross-reference
interchangeable
10NInterchangeable
interchangeable cross-reference
interchangeable
HD121AInterchangeable
interchangeable cross-reference
interchangeable
S43Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 1010N?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1010N?
1010N is a TRANSFORMER,POWER.
What parts can replace 1010N?
There are 17 known substitutes for 1010N: PA2029, AMS-QQ-A-200/3, 22601 and 14 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 1010N?
1010N is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-450-4747. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1010N

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026