PartsTable
Technical Data Sheet
Download PDF

10109676 — WASHER,FLAT

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

10109676: WASHER,FLAT.

The WASHER,FLAT is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING OVERALL, thickness: 0.007 INCHES MINIMUM AND 0.013 INCHES MAXIMUM IN, hole_diameter: 0.090 INCHES MINIMUM AND 0.096 INCHES MAXIMUM IN, overall_diameter: 0.168 INCHES MINIMUM AND 0.174 INCHES MAXIMUM IN, special_features: SPLIT THROUGH HALF OF WASHER, peripheral_shape_style: ROUND. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-133-3914, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10109676
NSN: 5310-01-133-3914
FSC: 5310 — Nuts and Washers
CAGE: A486G — NIMIKKEISTOKESKUS NCB FINLAND (FIN)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
thickness0.007 INCHES MINIMUM AND 0.013 INCHES MAXIMUM IN
hole_diameter0.090 INCHES MINIMUM AND 0.096 INCHES MAXIMUM IN
overall_diameter0.168 INCHES MINIMUM AND 0.174 INCHES MAXIMUM IN
special_featuresSPLIT THROUGH HALF OF WASHER
peripheral_shape_styleROUND
center_hole_shape_styleROUND
cross-sectional_shape_styleRECTANGULAR
NSN5310-01-133-3914
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 10109676 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OVERALL DIAMETER: 0.168 INCHES MINIMUM AND 0.174 INCHES MAXIMUM IN
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR
•
PERIPHERAL SHAPE STYLE: ROUND
•
MATERIAL: STEEL CORROSION RESISTING OVERALL
•
CENTER HOLE SHAPE STYLE: ROUND
•
HOLE DIAMETER: 0.090 INCHES MINIMUM AND 0.096 INCHES MAXIMUM IN
•
THICKNESS: 0.007 INCHES MINIMUM AND 0.013 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
OVERALL DIAMETER0.168 INCHES MINIMUM AND 0.174 INCHES MAXIMUM IN
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
SPECIAL FEATURESSPLIT THROUGH HALF OF WASHER
PERIPHERAL SHAPE STYLEROUND
MATERIALSTEEL CORROSION RESISTING OVERALL
CENTER HOLE SHAPE STYLEROUND
HOLE DIAMETER0.090 INCHES MINIMUM AND 0.096 INCHES MAXIMUM IN
THICKNESS0.007 INCHES MINIMUM AND 0.013 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 3
7109226-001Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
7109226Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
1057Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 10109676?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10109676?
10109676 is a WASHER,FLAT.
What parts can replace 10109676?
There are 3 known substitutes for 10109676: 7109226-001, 7109226, 1057. Substitute compatibility should be verified for your specific system.
What is the NSN for 10109676?
10109676 is cataloged in the U.S. Government catalog under NSN 5310-01-133-3914. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10109676

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.