PartsTable
Technical Data Sheet
Download PDF

10109646 — NUT,PLAIN,ROUND

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

10109646: NUT,PLAIN,ROUND.

The NUT,PLAIN,ROUND is a the manufacturer industrial component. Key specifications include material: NICKEL ALLOY 718 OVERALL, nut_diameter: 0.448 INCHES MAXIMUM IN, thread_class: 3B, nut_thickness: 0.315 INCHES MAXIMUM IN, thread_series: UNIFIED NATIONAL JOINT FINE (UNJF), special_features: SIX SLOTS EQUALLY SPACED 0.078 IN. MIN 0.109 IN.

MAX WIDE BY 0.157 IN. MIN 0.187 IN. MAX DEEP; DRY FILM LUBRICANT IN.

This part is cataloged in the U.S. Government catalog under NSN 5310-01-132-4401, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10109646
NSN: 5310-01-132-4401
FSC: 5310 — Nuts and Washers
CAGE: A486G — NIMIKKEISTOKESKUS NCB FINLAND (FIN)
SPECIFICATIONS
materialNICKEL ALLOY 718 OVERALL
nut_diameter0.448 INCHES MAXIMUM IN
thread_class3B
nut_thickness0.315 INCHES MAXIMUM IN
thread_seriesUNIFIED NATIONAL JOINT FINE (UNJF)
special_featuresSIX SLOTS EQUALLY SPACED 0.078 IN. MIN 0.109 IN. MAX WIDE BY 0.157 IN. MIN 0.187 IN. MAX DEEP; DRY FILM LUBRICANT IN
thread_directionRIGHT-HAND
drive_point_depth0.027 INCHES MINIMUM AND 0.028 INCHES MAXIMUM IN
drive_point_width0.031 INCHES MINIMUM AND 0.037 INCHES MAXIMUM IN
surface_treatmentPASSIVATE OVERALL
nominal_thread_size0.250 INCHES IN
drive_point_quantity12
NSN5310-01-132-4401
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 10109646 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD SERIES: UNIFIED NATIONAL JOINT FINE (UNJF)
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
DRIVE POINT WIDTH: 0.031 INCHES MINIMUM AND 0.037 INCHES MAXIMUM IN
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.250 INCHES IN
•
NUT DIAMETER: 0.448 INCHES MAXIMUM IN
•
DRIVE POINT DEPTH: 0.027 INCHES MINIMUM AND 0.028 INCHES MAXIMUM IN
•
NUT THICKNESS: 0.315 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
THREAD SERIESUNIFIED NATIONAL JOINT FINE (UNJF)
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
DRIVE POINT WIDTH0.031 INCHES MINIMUM AND 0.037 INCHES MAXIMUM IN
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.250 INCHES IN
NUT DIAMETER0.448 INCHES MAXIMUM IN
DRIVE POINT DEPTH0.027 INCHES MINIMUM AND 0.028 INCHES MAXIMUM IN
NUT THICKNESS0.315 INCHES MAXIMUM IN
SPECIAL FEATURESSIX SLOTS EQUALLY SPACED 0.078 IN. MIN 0.109 IN. MAX WIDE BY 0.157 IN. MIN 0.187 IN. MAX DEEP; DRY FILM LUBRICANT IN
SURFACE TREATMENTPASSIVATE OVERALL
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES 2
ST3M797C4Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
79219-428Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 10109646?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10109646?
10109646 is a NUT,PLAIN,ROUND.
What parts can replace 10109646?
There are 2 known substitutes for 10109646: ST3M797C4, 79219-428. Substitute compatibility should be verified for your specific system.
What is the NSN for 10109646?
10109646 is cataloged in the U.S. Government catalog under NSN 5310-01-132-4401. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10109646