PartsTable
Technical Data Sheet
Download PDF

10109381 — NUT,PLAIN,HEXAGON

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

10109381: NUT,PLAIN,HEXAGON.

The NUT,PLAIN,HEXAGON is a the manufacturer industrial component. Key specifications include nut_style: HEXAGON, nut_height: 0.250 INCHES NOMINAL IN, width_across_flats: 1.109 INCHES MINIMUM AND 1.127 INCHES MAXIMUM IN, nominal_thread_size: 0.750 INCHES IN, bearing_surface_type: FLAT, drilled_hole_diameter: 0.069 INCHES MINIMUM AND 0.074 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-121-4299, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10109381
NSN: 5310-01-121-4299
FSC: 5310 — Nuts and Washers
CAGE: A486G — NIMIKKEISTOKESKUS NCB FINLAND (FIN)
SPECIFICATIONS
nut_styleHEXAGON
nut_height0.250 INCHES NOMINAL IN
width_across_flats1.109 INCHES MINIMUM AND 1.127 INCHES MAXIMUM IN
nominal_thread_size0.750 INCHES IN
bearing_surface_typeFLAT
drilled_hole_diameter0.069 INCHES MINIMUM AND 0.074 INCHES MAXIMUM IN
hole_type_and_quantity6 DRILLED
hole_configuration_styleCONFIGURATION B
thread_quantity_per_inch16
NSN5310-01-121-4299
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 10109381 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 1.109 INCHES MINIMUM AND 1.127 INCHES MAXIMUM IN
•
HOLE CONFIGURATION STYLE: CONFIGURATION B
•
NOMINAL THREAD SIZE: 0.750 INCHES IN
•
NUT HEIGHT: 0.250 INCHES NOMINAL IN
•
DRILLED HOLE DIAMETER: 0.069 INCHES MINIMUM AND 0.074 INCHES MAXIMUM IN
•
NUT STYLE: HEXAGON
•
THREAD QUANTITY PER INCH: 16
•
BEARING SURFACE TYPE: FLAT
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS1.109 INCHES MINIMUM AND 1.127 INCHES MAXIMUM IN
HOLE CONFIGURATION STYLECONFIGURATION B
NOMINAL THREAD SIZE0.750 INCHES IN
NUT HEIGHT0.250 INCHES NOMINAL IN
DRILLED HOLE DIAMETER0.069 INCHES MINIMUM AND 0.074 INCHES MAXIMUM IN
NUT STYLEHEXAGON
THREAD QUANTITY PER INCH16
BEARING SURFACE TYPEFLAT
HOLE TYPE AND QUANTITY6 DRILLED
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES 1
3597777Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 10109381?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10109381?
10109381 is a NUT,PLAIN,HEXAGON.
What parts can replace 10109381?
There is 1 known substitute for 10109381: 3597777. Substitute compatibility should be verified for your specific system.
What is the NSN for 10109381?
10109381 is cataloged in the U.S. Government catalog under NSN 5310-01-121-4299. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10109381

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.