PartsTable
Technical Data Sheet
Download PDF

10109354 — NUT,PLAIN,SLOTTED,HEXAGON

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

10109354: NUT,PLAIN,SLOTTED,HEXAGON.

The NUT,PLAIN,SLOTTED,HEXAGON is a the manufacturer industrial component. Key specifications include material: IRON ALLOY 660 OVERALL, nut_style: SLOTTED, HEXAGON, nut_height: 0.458 INCHES MINIMUM AND 0.478 INCHES MAXIMUM IN, thread_class: 3B, thread_series: UNIFIED NATIONAL JOINT FINE (UNJF), special_features: DRY FILM LUBRICATED. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-119-9345, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10109354
NSN: 5310-01-119-9345
FSC: 5310 — Nuts and Washers
CAGE: A486G — NIMIKKEISTOKESKUS NCB FINLAND (FIN)
SPECIFICATIONS
materialIRON ALLOY 660 OVERALL
nut_styleSLOTTED, HEXAGON
nut_height0.458 INCHES MINIMUM AND 0.478 INCHES MAXIMUM IN
thread_class3B
thread_seriesUNIFIED NATIONAL JOINT FINE (UNJF)
special_featuresDRY FILM LUBRICATED
thread_directionRIGHT-HAND
countersink_angle110.0 DEGREES NOMINAL NUT
surface_treatmentPASSIVATE OVERALL
width_across_flats1.109 INCHES MINIMUM AND 1.127 INCHES MAXIMUM IN
nominal_thread_size0.750 INCHES IN
bearing_surface_typeFLAT
NSN5310-01-119-9345
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 10109354 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 1.109 INCHES MINIMUM AND 1.127 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
THREAD SERIES: UNIFIED NATIONAL JOINT FINE (UNJF)
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5731 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 5732 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.750 INCHES IN
•
NUT HEIGHT: 0.458 INCHES MINIMUM AND 0.478 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS1.109 INCHES MINIMUM AND 1.127 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD SERIESUNIFIED NATIONAL JOINT FINE (UNJF)
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5731 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 5732 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.750 INCHES IN
NUT HEIGHT0.458 INCHES MINIMUM AND 0.478 INCHES MAXIMUM IN
SPECIAL FEATURESDRY FILM LUBRICATED
SURFACE TREATMENTPASSIVATE OVERALL
COUNTERSINK ANGLE110.0 DEGREES NOMINAL NUT
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES 5
3M891-12Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
H52351-12Reference document
Same NSN cross-reference
Reference document — Secondary reference
E12674-12Reference document
Same NSN cross-reference
Reference document — Secondary reference
79537-1216Reference document
Same NSN cross-reference
Reference document — Secondary reference
AD3M891-12Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 10109354?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10109354?
10109354 is a NUT,PLAIN,SLOTTED,HEXAGON.
What parts can replace 10109354?
There are 5 known substitutes for 10109354: 3M891-12, H52351-12, E12674-12 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 10109354?
10109354 is cataloged in the U.S. Government catalog under NSN 5310-01-119-9345. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10109354

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.