PartsTable
Technical Data Sheet
Download PDF

10108099 — BUSHING,SLEEVE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

10108099: BUSHING,SLEEVE.

The BUSHING,SLEEVE is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY 172 OVERALL, corner_shape: SQUARE ALL CORNERS, overall_length: 0.8100 INCHES MINIMUM AND 0.8200 INCHES MAXIMUM IN, special_features: ID DRY FILM LUBRICATED,P.S. 18021,CLASS 1 W/ ACETYL ALCOHOL OVERCOAT,P.S.

18015 FOR REAMING AT ASSEMBLY W, style_designator: SOLID, PLAIN, NO OUTSIDE FLANGES, body_inside_diameter: 2.2030 INCHES MINIMUM AND 2.2040 INCHES MAXIMUM IN. This part is cataloged in the U.S. Government catalog under NSN 5340-00-917-5836, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10108099
NSN: 5340-00-917-5836
NIINs: 009175836, 011389656
FSC: 5340 — Hardware, Commercial
CAGE: 18876 — US ARMY AVIATION AND MISSILE COMMAND (USA)
SPECIFICATIONS
materialCOPPER ALLOY 172 OVERALL
corner_shapeSQUARE ALL CORNERS
overall_length0.8100 INCHES MINIMUM AND 0.8200 INCHES MAXIMUM IN
special_featuresID DRY FILM LUBRICATED,P.S. 18021,CLASS 1 W/ ACETYL ALCOHOL OVERCOAT,P.S. 18015 FOR REAMING AT ASSEMBLY W
style_designatorSOLID, PLAIN, NO OUTSIDE FLANGES
body_inside_diameter2.2030 INCHES MINIMUM AND 2.2040 INCHES MAXIMUM IN
body_outside_diameter2.3730 INCHES MINIMUM AND 2.3740 INCHES MAXIMUM IN
material_document_and_classificationQQ-C-530,COND AT FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5340-00-917-5836
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 10108099 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING HOLE QUANTITY: 3
•
REVERSIBLE FEATURE: NOT INCLUDED
•
KNUCKLE INSIDE DIAMETER: 0.234 INCHES MINIMUM AND 0.239 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: BUTT STAGGERED HOLES
•
MOUNTING HOLE DIAMETER: 0.127 INCHES MINIMUM AND 0.133 INCHES MAXIMUM IN
•
PIN CENTER TO BODY EDGE DISTANCE: 1.375 INCHES NOMINAL IN
•
HINGE PIN: NOT INCLUDED
TECHNICAL CHARACTERISTICS
MOUNTING HOLE QUANTITY3
REVERSIBLE FEATURENOT INCLUDED
KNUCKLE INSIDE DIAMETER0.234 INCHES MINIMUM AND 0.239 INCHES MAXIMUM IN
STYLE DESIGNATORBUTT STAGGERED HOLES
MOUNTING HOLE DIAMETER0.127 INCHES MINIMUM AND 0.133 INCHES MAXIMUM IN
OVERALL LENGTH1.688 INCHES NOMINAL IN
PIN CENTER TO BODY EDGE DISTANCE1.375 INCHES NOMINAL IN
HINGE PINNOT INCLUDED
MATERIAL THICKNESS0.125 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH1.000 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 10108099?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10108099?
10108099 is a BUSHING,SLEEVE.
What is the NSN for 10108099?
10108099 is cataloged in the U.S. Government catalog under NSN 5340-00-917-5836. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10108099

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.