PartsTable
Technical Data Sheet
Download PDF

10107841 — BUSHING,SLEEVE

✓ Government record, cited
— · BALL BEARING
PRODUCT OVERVIEW

10107841: BUSHING,SLEEVE.

The BUSHING,SLEEVE is a the manufacturer industrial component. Key specifications include flange_width: 0.0600 INCHES MINIMUM AND 0.0800 INCHES MAXIMUM IN, overall_length: 0.4700 INCHES MINIMUM AND 0.5100 INCHES MAXIMUM IN, special_features: ELLIPTICAL BORE,0.5000 IN. MIN,0.5020 IN.

MAX MINOR DIA,0.6000 IN. MIN,0.6200 IN. MAX MAJOR DIA IN, body_inside_diameter: 0.5000 INCHES MINIMUM AND 0.6200 INCHES MAXIMUM IN, body_outside_diameter: 0.7506 INCHES MINIMUM AND 0.7511 INCHES MAXIMUM IN, flange_outside_diameter: 0.9600 INCHES MINIMUM AND 0.9800 INCHES MAXIMUM IN.

This part is cataloged in the U.S. Government catalog under NSN 3120-01-129-0723, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10107841
NSN: 3120-01-129-0723
FSC: 3120 — Bearings, Plain, Unmounted
CAGE: A486G — NIMIKKEISTOKESKUS NCB FINLAND (FIN)
SPECIFICATIONS
flange_width0.0600 INCHES MINIMUM AND 0.0800 INCHES MAXIMUM IN
overall_length0.4700 INCHES MINIMUM AND 0.5100 INCHES MAXIMUM IN
special_featuresELLIPTICAL BORE,0.5000 IN. MIN,0.5020 IN. MAX MINOR DIA,0.6000 IN. MIN,0.6200 IN. MAX MAJOR DIA IN
body_inside_diameter0.5000 INCHES MINIMUM AND 0.6200 INCHES MAXIMUM IN
body_outside_diameter0.7506 INCHES MINIMUM AND 0.7511 INCHES MAXIMUM IN
flange_outside_diameter0.9600 INCHES MINIMUM AND 0.9800 INCHES MAXIMUM IN
NSN3120-01-129-0723
COMPONENT DIAGRAM
BALL BEARING — SEAL TYPE DETERMINES MAINTENANCE OD: — · BORE: — · WIDTH: — SEAL: Open · PN: 10107841 · OEM ⚠ VERIFY BEFORE ORDERING ABEC grade: higher = tighter tolerance = higher cost. ABEC-1 is standard, ABEC-7+ for precision spindles. Open, shielded (ZZ), and sealed (2RS) versions have different max RPM ratings ✓ BROKER TIP 2RS = sealed for life (no maintenance). ZZ = shielded, re-greaseable. Open = must lubricate on install. Common interchange: 6205-2RS = 6205-2RSR = 6205-DDU (same bearing, different suffix) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FLANGE OUTSIDE DIAMETER: 0.9600 INCHES MINIMUM AND 0.9800 INCHES MAXIMUM IN
•
BODY OUTSIDE DIAMETER: 0.7506 INCHES MINIMUM AND 0.7511 INCHES MAXIMUM IN
•
BODY INSIDE DIAMETER: 0.5000 INCHES MINIMUM AND 0.6200 INCHES MAXIMUM IN
•
FLANGE WIDTH: 0.0600 INCHES MINIMUM AND 0.0800 INCHES MAXIMUM IN
•
TEST DATA DOCUMENT: 76301-PS21202,CLASS A SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
TECHNICAL CHARACTERISTICS
FLANGE OUTSIDE DIAMETER0.9600 INCHES MINIMUM AND 0.9800 INCHES MAXIMUM IN
BODY OUTSIDE DIAMETER0.7506 INCHES MINIMUM AND 0.7511 INCHES MAXIMUM IN
OVERALL LENGTH0.4700 INCHES MINIMUM AND 0.5100 INCHES MAXIMUM IN
BODY INSIDE DIAMETER0.5000 INCHES MINIMUM AND 0.6200 INCHES MAXIMUM IN
SPECIAL FEATURESELLIPTICAL BORE,0.5000 IN. MIN,0.5020 IN. MAX MINOR DIA,0.6000 IN. MIN,0.6200 IN. MAX MAJOR DIA IN
FLANGE WIDTH0.0600 INCHES MINIMUM AND 0.0800 INCHES MAXIMUM IN
TEST DATA DOCUMENT76301-PS21202,CLASS A SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
OTHER ITEMS IN FSC 3120 — Bearings, Plain, Unmounted
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
3120-00-001-1288 3120-00-001-1835 3120-00-001-1838 3120-00-001-1928 3120-00-001-1934 3120-00-001-3933 3120-00-001-3937 3120-00-001-3938
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 10107841?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10107841?
10107841 is a BUSHING,SLEEVE.
What is the NSN for 10107841?
10107841 is cataloged in the U.S. Government catalog under NSN 3120-01-129-0723. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10107841

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.