PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 10107527
10107527 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL BALL, bore_shape: STRAIGHT, bore_diameter: 0.6693 INCHES NOMINAL IN, overall_width: 0.3937 INCHES NOMINAL IN, surface_finish: GROUND, style_designator: NON-LOADING GROOVE, NON-SEPARABLE. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-01-139-6814, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10107527
NSN: 3110-01-139-6814
FSC: 3110
CAGE: A486G — NIMIKKEISTOKESKUS NCB FINLAND (FIN)
SPECIFICATIONS
materialSTEEL BALL
bore_shapeSTRAIGHT
bore_diameter0.6693 INCHES NOMINAL IN
overall_width0.3937 INCHES NOMINAL IN
surface_finishGROUND
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
overall_outside_diameter1.3780 INCHES NOMINAL IN
internal_fit-up_designationSTANDARD
retainer_fabrication_methodMACHINED
standard_tolerance_designationABEC NO.1
NSN3110-01-139-6814
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 10107527 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: NON-LOADING GROOVE, NON-SEPARABLE
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
•
MATERIAL: STEEL BALL
•
BORE DIAMETER: 0.6693 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
STYLE DESIGNATORNON-LOADING GROOVE, NON-SEPARABLE
OVERALL WIDTH0.3937 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONABEC NO.1
MATERIALSTEEL BALL
MATERIALSTEEL INNER RING
MATERIALCOPPER ALLOY RETAINER
MATERIALSTEEL OUTER RING
BORE DIAMETER0.6693 INCHES NOMINAL IN
RETAINER FABRICATION METHODMACHINED
SURFACE FINISHGROUND
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
24201Interchangeable
interchangeable cross-reference
interchangeable
2493769Interchangeable
interchangeable cross-reference
interchangeable
WD3L03RS171096C09Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 10107527?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10107527?
10107527 is a BEARING,BALL,ANNULAR.
What parts can replace 10107527?
There are 3 known substitutes for 10107527: 24201, 2493769, WD3L03RS171096C09. Substitute compatibility should be verified for your specific system.
What is the NSN for 10107527?
10107527 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-01-139-6814. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10107527

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026