PartsTable
Technical Data Sheet
Download PDF

10107511 — BEARING,ROLLER,NEEDLE

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

10107511: BEARING,ROLLER,NEEDLE.

The BEARING,ROLLER,NEEDLE is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_diameter: 0.3745 INCHES MINIMUM AND 0.3745 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM0.3750 INCHES MAXIMUM IN, overall_width: 0.4220 INCHES MINIMUM AND 0.4220 INCHES MINIMUM AND 0.4320 INCHES MAXIMUM0.4320 INCHES MAXIMUM IN, alignment_type: RIGIDRIGID, lubrication_material: GREASEGREASE, overall_outside_diameter: 0.5066 INCHES MINIMUM AND 0.5066 INCHES MINIMUM AND 0.5071 INCHES MAXIMUM0.5071 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 3110-01-134-2790, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10107511
NSN: 3110-01-134-2790
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: A486G — NIMIKKEISTOKESKUS NCB FINLAND (FIN)
SPECIFICATIONS
materialSTEEL OVERALL
bore_diameter0.3745 INCHES MINIMUM AND 0.3745 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM0.3750 INCHES MAXIMUM IN
overall_width0.4220 INCHES MINIMUM AND 0.4220 INCHES MINIMUM AND 0.4320 INCHES MAXIMUM0.4320 INCHES MAXIMUM IN
alignment_typeRIGIDRIGID
lubrication_materialGREASEGREASE
overall_outside_diameter0.5066 INCHES MINIMUM AND 0.5066 INCHES MINIMUM AND 0.5071 INCHES MAXIMUM0.5071 INCHES MAXIMUM IN
lubrication_material_document_and_classificationMIL-G-81322 MIL SPEC SINGLE MATERIAL RESPONSEMIL-G-81322 MIL SPEC SINGLE MATERIAL RESPONSE
NSN3110-01-134-2790
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 10107511 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LUBRICATION MATERIAL: GREASEGREASE
•
OVERALL OUTSIDE DIAMETER: 0.5066 INCHES MINIMUM AND 0.5066 INCHES MINIMUM AND 0.5071 INCHES MAXIMUM0.5071 INCHES MAXIMUM IN
•
ALIGNMENT TYPE: RIGIDRIGID
•
BORE DIAMETER: 0.3745 INCHES MINIMUM AND 0.3745 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM0.3750 INCHES MAXIMUM IN
•
MATERIAL: STEEL OVERALL
•
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-81322 MIL SPEC SINGLE MATERIAL RESPONSEMIL-G-81322 MIL SPEC SINGLE MATERIAL RESPONSE
TECHNICAL CHARACTERISTICS
LUBRICATION MATERIALGREASEGREASE
OVERALL WIDTH0.4220 INCHES MINIMUM AND 0.4220 INCHES MINIMUM AND 0.4320 INCHES MAXIMUM0.4320 INCHES MAXIMUM IN
OVERALL OUTSIDE DIAMETER0.5066 INCHES MINIMUM AND 0.5066 INCHES MINIMUM AND 0.5071 INCHES MAXIMUM0.5071 INCHES MAXIMUM IN
ALIGNMENT TYPERIGIDRIGID
BORE DIAMETER0.3745 INCHES MINIMUM AND 0.3745 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM0.3750 INCHES MAXIMUM IN
MATERIALSTEEL OVERALL
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATIONMIL-G-81322 MIL SPEC SINGLE MATERIAL RESPONSEMIL-G-81322 MIL SPEC SINGLE MATERIAL RESPONSE
OTHER ITEMS IN FSC 3110 — Bearings, Antifriction, Unmounted
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
3110-00-001-1937 3110-00-001-1938 3110-00-001-4661 3110-00-001-4662 3110-00-001-4689 3110-00-001-4722
SUBSTITUTES & CROSS-REFERENCES 3
137-296-9103Reference document
Same NSN cross-reference
Reference document — Secondary reference
C36186-137-296-9103Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
JC-68Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 10107511?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10107511?
10107511 is a BEARING,ROLLER,NEEDLE.
What parts can replace 10107511?
There are 3 known substitutes for 10107511: 137-296-9103, C36186-137-296-9103, JC-68. Substitute compatibility should be verified for your specific system.
What is the NSN for 10107511?
10107511 is cataloged in the U.S. Government catalog under NSN 3110-01-134-2790. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10107511