10106653: GEAR,SPUR.
The GEAR,SPUR is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, body_style: WEBBED, OFFSET, WITH LIGHTENING HOLES, bore_style: INVOLUTE SPLINE BOTH ENDS, tooth_form: STANDARD, pitch_diameter: 3.0000 INCHES NOMINAL IN, pressure_angle: 20.0000 DEGREES. This part is cataloged in the U.S.
Government catalog under NSN 3020-01-119-7019, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
| material | STEEL OVERALL |
| body_style | WEBBED, OFFSET, WITH LIGHTENING HOLES |
| bore_style | INVOLUTE SPLINE BOTH ENDS |
| tooth_form | STANDARD |
| pitch_diameter | 3.0000 INCHES NOMINAL IN |
| pressure_angle | 20.0000 DEGREES |
| teeth_quantity | 36 |
| hardness_rating | 33.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM OVERALL |
| spline_quantity | 23 BOTH ENDS |
| special_features | COUNTERBORE 1ST END,0.760 IN. DIA,BY 0.460 IN. DEEP IN |
| style_designator | PROTRUDING HUBS |
| face_nominal_width | 0.430 INCHES IN |
| NSN | 3020-01-119-7019 |
| BORE NOMINAL DIAMETER | 0.754 INCHES BOTH ENDS IN |
| HUB NOMINAL DIAMETER | 0.930 INCHES BOTH ENDS IN |
| TEETH QUANTITY | 36 |
| BODY STYLE | WEBBED, OFFSET, WITH LIGHTENING HOLES |
| BORE STYLE | INVOLUTE SPLINE BOTH ENDS |
| NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.340 INCHES FIRST END IN |
| NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.230 INCHES SECOND END IN |
| HARDNESS RATING | 33.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM OVERALL |
| STYLE DESIGNATOR | PROTRUDING HUBS |
| PITCH DIAMETER | 3.0000 INCHES NOMINAL IN |
No substitute or cross-reference records for this part.