PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 10106607
10106607 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The FILTER,BAND SUPPRESSION is a the manufacturer industrial component. This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-185-1863, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10106607
NSN: 5310-00-185-1863
FSC: 5310
CAGE: 18876 — US ARMY AVIATION AND MISSILE COMMAND (USA)
SPECIFICATIONS
special_featuresSTEEL PER AMS5548; 0.900 IN. MIN,0.950 IN. MAX O/A LG; 0.510 IN. MAX O/A DIA; 6-32 UNC-2A THD,0.215 IN. LG ONE END; OPERATING ALTITUDE,0 TO 70000 FT A
NSN5310-00-185-1863
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 10106607 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL THICKNESS: 0.078 INCHES MINIMUM AND 0.110 INCHES MAXIMUM IN
•
SHOULDER DIAMETER: 0.796 INCHES MINIMUM AND 0.828 INCHES MAXIMUM IN
•
HOLE DIAMETER: 0.266 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-B-626 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
SHOULDER HEIGHT: 0.140 INCHES MINIMUM AND 0.172 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: SHOULDERED
•
MATERIAL: COPPER ALLOY 360 OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL THICKNESS0.078 INCHES MINIMUM AND 0.110 INCHES MAXIMUM IN
SHOULDER DIAMETER0.796 INCHES MINIMUM AND 0.828 INCHES MAXIMUM IN
SPECIAL FEATURESOD OF SHOULDER HAS 2 FLATS LOCATED 180 DEG APART 0.687 IN. BETWEEN FLATS IN
HOLE DIAMETER0.266 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-B-626 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
SHOULDER HEIGHT0.140 INCHES MINIMUM AND 0.172 INCHES MAXIMUM IN
STYLE DESIGNATORSHOULDERED
MATERIALCOPPER ALLOY 360 OVERALL
OUTSIDE DIAMETER1.109 INCHES MINIMUM AND 1.141 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
40711Interchangeable
interchangeable cross-reference
interchangeable
10106607Interchangeable
interchangeable cross-reference
interchangeable
050.06.000Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 10106607?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10106607?
10106607 is a FILTER,BAND SUPPRESSION.
What parts can replace 10106607?
There are 3 known substitutes for 10106607: 40711, 10106607, 050.06.000. Substitute compatibility should be verified for your specific system.
What is the NSN for 10106607?
10106607 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-185-1863. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10106607

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026