PartsTable
Technical Data Sheet
Download PDF

10106118 — CYLINDER,HYDRAULIC ACCUMULATOR

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

10106118: CYLINDER,HYDRAULIC ACCUMULATOR.

The CYLINDER,HYDRAULIC ACCUMULATOR is a the manufacturer industrial component. Key specifications include body_material: ALUMINUM ALLOY, bore_diameter: 1.441 INCHES MINIMUM AND 1.443 INCHES MAXIMUM IN, overall_length: 6.020 INCHES MAXIMUM IN, special_features: ANODIZED MIL-A-8625,TYPE 1; MICROINCH FINISH 16, mounting_provision: UNTHREADED MOUNTING HOLES, body_outside_diameter: 1.598 INCHES MINIMUM AND 1.600 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-704-0775, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10106118
NSN: 5340-00-704-0775
NIINs: 007040775, 011392439
FSC: 5340 — Hardware, Commercial
CAGE: 18876 — US ARMY AVIATION AND MISSILE COMMAND (USA)
SPECIFICATIONS
body_materialALUMINUM ALLOY
bore_diameter1.441 INCHES MINIMUM AND 1.443 INCHES MAXIMUM IN
overall_length6.020 INCHES MAXIMUM IN
special_featuresANODIZED MIL-A-8625,TYPE 1; MICROINCH FINISH 16
mounting_provisionUNTHREADED MOUNTING HOLES
body_outside_diameter1.598 INCHES MINIMUM AND 1.600 INCHES MAXIMUM IN
mounting_facility_diameter0.182 INCHES MINIMUM AND 0.192 INCHES MAXIMUM IN
mounting_type_and_locationFLANGE CYLINDER HEAD END
mounting_facility_circle_diameter2.470 INCHES NOMINAL IN
mounting_provision_arrangement_styleSIX HOLE BOLT CIRCLE
NSN5340-00-704-0775
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 10106118 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 2.250 INCHES NOMINAL IN
•
FEATURES PROVIDED: SCREW AND WASHER
•
WIDTH: 1.910 INCHES NOMINAL IN
•
MATERIAL: UNABLE TO DECODE
TECHNICAL CHARACTERISTICS
LENGTH2.250 INCHES NOMINAL IN
FEATURES PROVIDEDSCREW AND WASHER
SPECIAL FEATURESDOWELL PINS INCLUDED;2 MTG SLOTS;MATL:BODY STEEL,HANDLE STEEL,CLAW STEEL
WIDTH1.910 INCHES NOMINAL IN
END ITEM IDENTIFICATIONAIRCRAFT, (AC-130H, MC-130H, EC-130E, HC-130); JOINT STARS TARGET RA
MATERIALUNABLE TO DECODE
SUBSTITUTES & CROSS-REFERENCES 9
53002141Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
A20034-1Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
529260C90187Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
TQ-64001Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
TQ-64003Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
2180869-1Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 10106118?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10106118?
10106118 is a CYLINDER,HYDRAULIC ACCUMULATOR.
What parts can replace 10106118?
There are 9 known substitutes for 10106118: 53002141, A20034-1, 529260C90187 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 10106118?
10106118 is cataloged in the U.S. Government catalog under NSN 5340-00-704-0775. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10106118