PartsTable
Technical Data Sheet
Download PDF

10105621 — SNAP HOOK

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

10105621: SNAP HOOK.

The SNAP HOOK is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY CONNECTION END, design_type: FIXED, end_position: HOOKS IN SAME PLANE, inside_width: 0.312 INCHES NOMINAL IN, inside_length: 1.062 INCHES NOMINAL IN, overall_length: 3.000 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-921-3601, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10105621
NSN: 5340-00-921-3601
FSC: 5340 — Hardware, Commercial
CAGE: 18876 — US ARMY AVIATION AND MISSILE COMMAND (USA)
SPECIFICATIONS
materialCOPPER ALLOY CONNECTION END
design_typeFIXED
end_positionHOOKS IN SAME PLANE
inside_width0.312 INCHES NOMINAL IN
inside_length1.062 INCHES NOMINAL IN
overall_length3.000 INCHES NOMINAL IN
unattached_ringNOT INCLUDED
end_connection_styleLOOP
hook_style_designatorSPRING BLADE
rubber_covered_featureNOT INCLUDED
NSN5340-00-921-3601
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 10105621 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
INSIDE WIDTH: 0.312 INCHES NOMINAL IN
•
UNATTACHED RING: NOT INCLUDED
•
INSIDE LENGTH: 1.062 INCHES NOMINAL IN
•
DESIGN TYPE: FIXED
•
END CONNECTION STYLE: LOOP
•
END POSITION: HOOKS IN SAME PLANE
•
HOOK STYLE DESIGNATOR: SPRING BLADE
TECHNICAL CHARACTERISTICS
INSIDE WIDTH0.312 INCHES NOMINAL IN
UNATTACHED RINGNOT INCLUDED
INSIDE LENGTH1.062 INCHES NOMINAL IN
DESIGN TYPEFIXED
OVERALL LENGTH3.000 INCHES NOMINAL IN
END CONNECTION STYLELOOP
END POSITIONHOOKS IN SAME PLANE
HOOK STYLE DESIGNATORSPRING BLADE
MATERIALCOPPER ALLOY HOOK
MATERIALCOPPER ALLOY BLADE
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
F1G429Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 10105621?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10105621?
10105621 is a SNAP HOOK.
What parts can replace 10105621?
There is 1 known substitute for 10105621: F1G429. Substitute compatibility should be verified for your specific system.
What is the NSN for 10105621?
10105621 is cataloged in the U.S. Government catalog under NSN 5340-00-921-3601. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10105621