PartsTable
Technical Data Sheet
Download PDF

1010483 — SCREW,CAP,HEXAGON HEAD

✓ Government record, cited
3M · BOLT SCREW
PRODUCT OVERVIEW

1010483: SCREW,CAP,HEXAGON HEAD.

The SCREW,CAP,HEXAGON HEAD is a 3M industrial component. Key specifications include material: STEEL OVERALL, head_style: HEXAGON, head_height: 0.150 INCHES MINIMUM AND 0.163 INCHES MAXIMUM IN, thread_class: 3A A, thread_length: 0.525 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN, fastener_length: 0.625 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-038-1552, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1010483
NSN: 5305-01-038-1552
FSC: 5305 — Screws
CAGE: 3K042 — BAMAL FASTENER CORP (USA)
SPECIFICATIONS
materialSTEEL OVERALL
head_styleHEXAGON
head_height0.150 INCHES MINIMUM AND 0.163 INCHES MAXIMUM IN
thread_class3A A
thread_length0.525 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN
fastener_length0.625 INCHES NOMINAL IN
thread_directionRIGHT-HAND
surface_treatmentZINC OVERALL
width_between_flats0.428 INCHES MINIMUM AND 0.437 INCHES MAXIMUM IN
nominal_thread_diameter0.250 INCHES IN
thread_quantity_per_inch20
thread_series_designatorUNIFIED NATIONAL COARSE (UNC)
NSN5305-01-038-1552
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 1010483 · 3M ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.150 INCHES MINIMUM AND 0.163 INCHES MAXIMUM IN
•
FASTENER LENGTH: 0.625 INCHES NOMINAL IN
•
THREAD LENGTH: 0.525 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN
•
NOMINAL THREAD DIAMETER: 0.250 INCHES IN
•
HEAD STYLE: HEXAGON
•
THREAD DIRECTION: RIGHT-HAND
•
WIDTH BETWEEN FLATS: 0.428 INCHES MINIMUM AND 0.437 INCHES MAXIMUM IN
•
SURFACE TREATMENT: ZINC OVERALL
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.150 INCHES MINIMUM AND 0.163 INCHES MAXIMUM IN
FASTENER LENGTH0.625 INCHES NOMINAL IN
THREAD LENGTH0.525 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN
NOMINAL THREAD DIAMETER0.250 INCHES IN
HEAD STYLEHEXAGON
THREAD DIRECTIONRIGHT-HAND
WIDTH BETWEEN FLATS0.428 INCHES MINIMUM AND 0.437 INCHES MAXIMUM IN
SURFACE TREATMENTZINC OVERALL
THREAD CLASS3A A
THREAD QUANTITY PER INCH20
OTHER ITEMS IN FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-001-5016 5305-00-001-9160 5305-00-001-9629 5305-00-001-9742 5305-00-001-9768 5305-00-003-4306 5305-00-003-6694 5305-00-003-6753
SUBSTITUTES & CROSS-REFERENCES 1
402119-3Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 1010483?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1010483?
1010483 is a SCREW,CAP,HEXAGON HEAD manufactured by 3M.
What parts can replace 1010483?
There is 1 known substitute for 1010483: 402119-3. Substitute compatibility should be verified for your specific system.
What is the NSN for 1010483?
1010483 is cataloged in the U.S. Government catalog under NSN 5305-01-038-1552. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1010483