PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 10100B
10100B ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The ATTENUATOR,FIXED is a the manufacturer industrial component. Key specifications include width: 3.810 INCHES NOMINAL IN, material: ALUMINUM ALLOY 6061, body_style: ROUND, TERMINAL/TERMINALS IN OPPOSITE SURFACE, overall_length: 2.562 INCHES NOMINAL IN, mounting_method: CONNECTOR, overall_diameter: 0.531 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-513-5945, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10100B
NSN: 5340-00-513-5945
FSC: 5340
CAGE: 91893 — MSP AVIATION, INC. DBA MSP MAUFACTURING (USA)
SPECIFICATIONS
width3.810 INCHES NOMINAL IN
materialALUMINUM ALLOY 6061
body_styleROUND, TERMINAL/TERMINALS IN OPPOSITE SURFACE
overall_length2.562 INCHES NOMINAL IN
mounting_methodCONNECTOR
overall_diameter0.531 INCHES NOMINAL IN
surface_treatmentANODIZE
application_designTRANSMISSION LINE
terminal_type_and_quantity2 CONNECTOR
connection_type_per_functionFEMALE OUTPUT AND MALE INPUT
input_impedance_rating_in_ohms100.0
output_impedance_rating_in_ohms100.0
NSN5340-00-513-5945
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 10100B MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT: ANODIZE
•
WIDTH: 3.810 INCHES NOMINAL IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-A-8625,TYPE 1 MIL SPEC SINGLE TREATMENT RESPONSE
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-250/11,TEMPER 4 FED SPEC SINGLE MATERIAL RESPONSE
•
MATERIAL: ALUMINUM ALLOY 6061
TECHNICAL CHARACTERISTICS (FLIS)
SURFACE TREATMENTANODIZE
WIDTH3.810 INCHES NOMINAL IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-A-8625,TYPE 1 MIL SPEC SINGLE TREATMENT RESPONSE
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-250/11,TEMPER 4 FED SPEC SINGLE MATERIAL RESPONSE
MATERIALALUMINUM ALLOY 6061
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
10764Interchangeable
interchangeable cross-reference
interchangeable
3/8 MMO-SInterchangeable
interchangeable cross-reference
interchangeable
6-6-6 140438CInterchangeable
interchangeable cross-reference
interchangeable
VIEWGRAPH MOUNT 521Interchangeable
interchangeable cross-reference
interchangeable
84155Interchangeable
interchangeable cross-reference
interchangeable
P7595Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 10100B?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10100B?
10100B is a ATTENUATOR,FIXED.
What parts can replace 10100B?
There are 18 known substitutes for 10100B: 10764, 3/8 MMO-S, 6-6-6 140438C and 15 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 10100B?
10100B is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-513-5945. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10100B

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026