PartsTable
Technical Data Sheet
PartsTable / MRO / 1010-13
1010-13 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The JACKSCREW,ELECTRICAL CONNECTOR is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY, curve_type: FRENCH, head_style: FLAT COUNTERSUNK, body_length: 0.250 INCHES NOMINAL IN, thread_class: 2A A, body_diameter: 0.109 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-010-1013, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 1010-13
NSN: 5305-00-010-1013
FSC: 5305
CAGE: 21450 — ARMY WEAPONS COMMAND ATTN AMSWE-REE-S (USA)
SPECIFICATIONS
materialALUMINUM ALLOY
curve_typeFRENCH
head_styleFLAT COUNTERSUNK
body_length0.250 INCHES NOMINAL IN
thread_class2A A
body_diameter0.109 INCHES NOMINAL IN
head_diameter0.244 INCHES MINIMUM AND 0.279 INCHES MAXIMUM IN
rating_methodWINDING TURNS SINGLE COMPONENT SINGLE WINDING
terminal_typeWIRE LEAD
thread_length0.667 INCHES MINIMUM IN
turn_quantity50 SINGLE COMPONENT SINGLE WINDING
binding_methodSEALING PINS AND PRESSURE
NSN5305-00-010-1013
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 1010-13 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MINIMUM TENSILE STRENGTH: 55000 POUNDS PER SQUARE INCH LBS
•
FASTENER LENGTH: 0.750 INCHES NOMINAL IN
•
THREAD LENGTH: 0.667 INCHES MINIMUM IN
•
THREAD DIRECTION: RIGHT-HAND
•
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-B-613 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-B-626 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-W-321 FED SPEC SINGLE MATERIAL RESPONSE
•
HEAD DIAMETER: 0.244 INCHES MINIMUM AND 0.279 INCHES MAXIMUM IN
•
NONDEFINITIVE SPEC/STD DATA: 1 TYPE AND 2S STYLE
•
NOMINAL THREAD DIAMETER: 0.138 INCHES IN
TECHNICAL CHARACTERISTICS (FLIS)
MINIMUM TENSILE STRENGTH55000 POUNDS PER SQUARE INCH LBS
FASTENER LENGTH0.750 INCHES NOMINAL IN
THREAD LENGTH0.667 INCHES MINIMUM IN
THREAD DIRECTIONRIGHT-HAND
SCREW MATERIAL DOCUMENT AND CLASSIFICATIONQQ-B-613 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-B-626 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-W-321 FED SPEC SINGLE MATERIAL RESPONSE
HEAD DIAMETER0.244 INCHES MINIMUM AND 0.279 INCHES MAXIMUM IN
NONDEFINITIVE SPEC/STD DATA1 TYPE AND 2S STYLE
NOMINAL THREAD DIAMETER0.138 INCHES IN
THREAD QUANTITY PER INCH32
INTERNAL DRIVE STYLESLOT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 22
57-1008-13Interchangeable
interchangeable cross-reference
interchangeable
1010-13Interchangeable
interchangeable cross-reference
interchangeable
A-A-50213 TY1PN13Interchangeable
interchangeable cross-reference
interchangeable
S375-1076-2Interchangeable
interchangeable cross-reference
interchangeable
S375-1076P2Interchangeable
interchangeable cross-reference
interchangeable
MS28775-013Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 1010-13?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1010-13?
1010-13 is a JACKSCREW,ELECTRICAL CONNECTOR. It is classified as a MRO (MRO_GENERAL).
What parts can replace 1010-13?
There are 22 known substitutes for 1010-13: 57-1008-13, 1010-13, A-A-50213 TY1PN13 and 19 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 1010-13?
1010-13 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-010-1013. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1010-13

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026