PartsTable
Technical Data Sheet
PartsTable / MRO / 101-056
101-056 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The RESISTOR,FIXED,FILM is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC, body_length: 0.250 INCHES NOMINAL IN, body_diameter: 0.109 INCHES NOMINAL IN, terminal_type: WIRE LEAD, inclosure_type: ENCAPSULATED, conductor_length: 4.750 INCHES NOMINAL ALL CONDUCTORS IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-297-6905, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 101-056
NSN: 5331-00-297-6905
FSC: 5331 — O-RING
CAGE: 81580 — MCCULLOCH CORP (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC
body_length0.250 INCHES NOMINAL IN
body_diameter0.109 INCHES NOMINAL IN
terminal_typeWIRE LEAD
inclosure_typeENCAPSULATED
conductor_length4.750 INCHES NOMINAL ALL CONDUCTORS IN
style_designatorAXIAL TERMINAL EACH END
center_hole_diameter0.234 INCHES MINIMUM AND 0.244 INCHES MAXIMUM IN
electrical_resistance3.480 KILOHMS
reliability_indicatorNOT ESTABLISHED
cross-sectional_height0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
functional_descriptionWATER/TEMP. GAGE
NSN5331-00-297-6905
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 101-056 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 0.234 INCHES MINIMUM AND 0.244 INCHES MAXIMUM IN
•
MATERIAL: RUBBER SYNTHETIC
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL HEIGHT0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
CENTER HOLE DIAMETER0.234 INCHES MINIMUM AND 0.244 INCHES MAXIMUM IN
MATERIALRUBBER SYNTHETIC
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
A0014226Interchangeable
interchangeable cross-reference
interchangeable
7000992Interchangeable
interchangeable cross-reference
interchangeable
A14226Interchangeable
interchangeable cross-reference
interchangeable
101056-06Interchangeable
interchangeable cross-reference
interchangeable
101056Interchangeable
interchangeable cross-reference
interchangeable
5001-131Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 101-056?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 101-056?
101-056 is a RESISTOR,FIXED,FILM. It is classified as a MRO (MRO_GENERAL).
What parts can replace 101-056?
There are 7 known substitutes for 101-056: A0014226, 7000992, A14226 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 101-056?
101-056 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-297-6905. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 101-056

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026