PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 100S3
100S3 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include tip_type: MALE HEXAGONAL, overall_length: 1.938 INCHES NOMINAL IN, drive_shank_type: HEXAGON, features_provided: POWER TOOL, width_across_flats: 0.156 INCHES NOMINAL IN, shank_width_across_wrench_flats: 0.250 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-144-8735, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
100S3
NSN: 3110-00-144-8735
FSC: 3110
CAGE: 70854 — SCHAEFFLER AEROSPACE USA CORP DIV SCHAEFFLER AEROSPACE USA CORPORATION (USA)
SPECIFICATIONS
tip_typeMALE HEXAGONAL
overall_length1.938 INCHES NOMINAL IN
drive_shank_typeHEXAGON
features_providedPOWER TOOL
width_across_flats0.156 INCHES NOMINAL IN
shank_width_across_wrench_flats0.250 INCHES NOMINAL IN
NSN3110-00-144-8735
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 100S3 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: NON-LOADING GROOVE, NON-SEPARABLE
•
LOAD DIRECTION: RADIAL
•
INTERNAL FIT-UP DESIGNATION: STANDARD
•
SURFACE FINISH: GROUND
•
OVERALL OUTSIDE DIAMETER: 26.00 MILLIMETERS NOMINAL MM
•
BORE SHAPE: STRAIGHT
•
SHIELD QUANTITY: 1
TECHNICAL CHARACTERISTICS (FLIS)
STYLE DESIGNATORNON-LOADING GROOVE, NON-SEPARABLE
OVERALL WIDTH8.0 MILLIMETERS NOMINAL MM
LOAD DIRECTIONRADIAL
INTERNAL FIT-UP DESIGNATIONSTANDARD
SURFACE FINISHGROUND
OVERALL OUTSIDE DIAMETER26.00 MILLIMETERS NOMINAL MM
BORE SHAPESTRAIGHT
SHIELD QUANTITY1
MATERIALSTEEL OVERALL
STANDARD TOLERANCE DESIGNATIONABEC NO.5
VERIFIED SUBSTITUTES & CROSS-REFERENCES 11
100SInterchangeable
interchangeable cross-reference
interchangeable
UU-P-221Interchangeable
interchangeable cross-reference
interchangeable
208MInterchangeable
interchangeable cross-reference
interchangeable
9320PL1805109Interchangeable
interchangeable cross-reference
interchangeable
STRIP-N-STICK SPONGEInterchangeable
interchangeable cross-reference
interchangeable
29-2071Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 100S3?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 100S3?
100S3 is a BEARING,BALL,ANNULAR.
What parts can replace 100S3?
There are 11 known substitutes for 100S3: 100S, UU-P-221, 208M and 8 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 100S3?
100S3 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-144-8735. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 100S3

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026