PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 100P
100P ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The CLAMP,HOSE is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING OVERALL, overall_width: 0.500 INCHES MINIMUM IN, inside_diameter: 5.875 INCHES MINIMUM AND 6.750 INCHES MAXIMUM IN, style_designator: WIRE, surface_treatment: PASSIVATE OVERALL, fastening_device_type: SLOTTED HEXAGON HEAD SCREW. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-275-1437, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
100P
NSN: 5310-00-275-1437
FSC: 5310
CAGE: 93232 — CURTISS-WRIGHT ELECTRO-MECHANICAL CORPORATION DBA CURTISS WRIGHT ENGINEERED PUMP DIVISION USE CAGE CODE 0UBG9 FOR CATALOGING (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
overall_width0.500 INCHES MINIMUM IN
inside_diameter5.875 INCHES MINIMUM AND 6.750 INCHES MAXIMUM IN
style_designatorWIRE
surface_treatmentPASSIVATE OVERALL
fastening_device_typeSLOTTED HEXAGON HEAD SCREW
material_document_and_classificationSAE 300 SERIES ASSN STD SINGLE MATERIAL RESPONSE BAND
NSN5310-00-275-1437
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 100P · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: FIBER LOCKING INSERT
•
WIDTH ACROSS FLATS: 0.562 INCHES NOMINAL IN
•
THREAD DIRECTION: RIGHT-HAND
•
TEMP RATING: 250.0 FAHRENHEIT NOMINAL DEGF
•
LOCKING FEATURE: PREVAILING TORQUE WITH NONMETALLIC INSERT
•
NUT STYLE: CAP
•
NUT HEIGHT: 0.625 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALFIBER LOCKING INSERT
MATERIALCOPPER ALLOY OVERALL EXCEPT INSERT
WIDTH ACROSS FLATS0.562 INCHES NOMINAL IN
THREAD DIRECTIONRIGHT-HAND
TEMP RATING250.0 FAHRENHEIT NOMINAL DEGF
LOCKING FEATUREPREVAILING TORQUE WITH NONMETALLIC INSERT
NUT STYLECAP
NUT HEIGHT0.625 INCHES NOMINAL IN
NOMINAL THREAD SIZE0.312 INCHES IN
THREAD CLASS3B
VERIFIED SUBSTITUTES & CROSS-REFERENCES 23
405PInterchangeable
interchangeable cross-reference
interchangeable
198-04-51Interchangeable
interchangeable cross-reference
interchangeable
100PInterchangeable
interchangeable cross-reference
interchangeable
17844Interchangeable
interchangeable cross-reference
interchangeable
0180-2099Interchangeable
interchangeable cross-reference
interchangeable
1603267Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 100P?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 100P?
100P is a CLAMP,HOSE.
What parts can replace 100P?
There are 23 known substitutes for 100P: 405P, 198-04-51, 100P and 20 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 100P?
100P is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-275-1437. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 100P

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026