100CSK4-40X1-4L — SCREW,MACHINE

✓ Government record, cited

— · BOLT SCREW

PRODUCT OVERVIEW

100CSK4-40X1-4L: SCREW,MACHINE.

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: FLAT COUNTERSUNK, thread_class: 2A A, head_diameter: 0.191 INCHES MINIMUM AND 0.225 INCHES MAXIMUM IN, thread_length: 0.142 INCHES MINIMUM IN, screw_material: PLASTIC POLYHEXAMETHYLENE AMIDE, fastener_length: 0.219 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-869-1484, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

100CSK4-40X1-4L

NSN: 5305-00-869-1484
FSC: 5305 — Screws
CAGE: 79307 — WHITEHEAD METALS INC (USA)

SPECIFICATIONS

head_style	FLAT COUNTERSUNK
thread_class	2A A
head_diameter	0.191 INCHES MINIMUM AND 0.225 INCHES MAXIMUM IN
thread_length	0.142 INCHES MINIMUM IN
screw_material	PLASTIC POLYHEXAMETHYLENE AMIDE
fastener_length	0.219 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
thread_direction	RIGHT-HAND
countersink_angle	99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
internal_drive_style	SLOT
nominal_thread_diameter	0.112 INCHES IN
thread_quantity_per_inch	40
thread_series_designator	UNIFIED NATIONAL COARSE (UNC)
NSN	5305-00-869-1484

COMPONENT DIAGRAM

KEY FEATURES

•

FASTENER LENGTH: 0.219 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN

•

SCREW MATERIAL DOCUMENT AND CLASSIFICATION: MIL-M-20693 TY 1 MIL SPEC SINGLE MATERIAL RESPONSE

•

THREAD LENGTH: 0.142 INCHES MINIMUM IN

•

NOMINAL THREAD DIAMETER: 0.112 INCHES IN

•

HEAD STYLE: FLAT COUNTERSUNK

•

THREAD DIRECTION: RIGHT-HAND

•

SCREW MATERIAL: PLASTIC POLYHEXAMETHYLENE AMIDE

•

INTERNAL DRIVE STYLE: SLOT

TECHNICAL CHARACTERISTICS

FASTENER LENGTH	0.219 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
SCREW MATERIAL DOCUMENT AND CLASSIFICATION	MIL-M-20693 TY 1 MIL SPEC SINGLE MATERIAL RESPONSE
THREAD LENGTH	0.142 INCHES MINIMUM IN
NOMINAL THREAD DIAMETER	0.112 INCHES IN
HEAD STYLE	FLAT COUNTERSUNK
THREAD DIRECTION	RIGHT-HAND
SCREW MATERIAL	PLASTIC POLYHEXAMETHYLENE AMIDE
INTERNAL DRIVE STYLE	SLOT
COUNTERSINK ANGLE	99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
THREAD CLASS	2A A

SUBSTITUTES & CROSS-REFERENCES 5

1003146Reference document

Same NSN cross-reference

Reference document — Secondary reference

MS18211-29CSame NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

FFS92Reference document

Same NSN cross-reference

Reference document — Identification reference

101324-2Reference document

Same NSN cross-reference

Reference document — Secondary reference

7530326P3Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusCancelled· U.S. Government catalog

Acquisition advice: Terminal item — no further procurement; issued until stock is exhaustedNo demilitarization required

Ready to buy 100CSK4-40X1-4L?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 100CSK4-40X1-4L?

100CSK4-40X1-4L is a SCREW,MACHINE.

What parts can replace 100CSK4-40X1-4L?

There are 5 known substitutes for 100CSK4-40X1-4L: 1003146, MS18211-29C, FFS92 and 2 more. Substitute compatibility should be verified for your specific system.

What is the NSN for 100CSK4-40X1-4L?

100CSK4-40X1-4L is cataloged in the U.S. Government catalog under NSN 5305-00-869-1484. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

100CSK4-40X1-4L — SCREW,MACHINE

Request a Quote — 100CSK4-40X1-4L