PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 100CRT141H88
100CRT141H88 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

BEARING,ROLLER,RADIAL AND THRUST. Key specifications include overall_width: 8.8650 INCHES MINIMUM AND 8.8750 INCHES MAXIMUM IN, largest_bore_diameter: 10.0020 INCHES MINIMUM AND 10.0030 INCHES MAXIMUM IN, outer_ring_outside_diameter: 14.1240 INCHES MINIMUM AND 14.1250 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-01-006-9135, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
100CRT141H88
NSN: 3110-01-006-9135
FSC: 3110
CAGE: 39820 — KINGSBURY, INC. DBA MESSINGER BEARINGS DIV MESSINGER BEARINGS (USA)
SPECIFICATIONS
overall_width8.8650 INCHES MINIMUM AND 8.8750 INCHES MAXIMUM IN
largest_bore_diameter10.0020 INCHES MINIMUM AND 10.0030 INCHES MAXIMUM IN
outer_ring_outside_diameter14.1240 INCHES MINIMUM AND 14.1250 INCHES MAXIMUM IN
NSN3110-01-006-9135
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 100CRT141H88 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTER RING OUTSIDE DIAMETER: 14.1240 INCHES MINIMUM AND 14.1250 INCHES MAXIMUM IN
•
LARGEST BORE DIAMETER: 10.0020 INCHES MINIMUM AND 10.0030 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
OUTER RING OUTSIDE DIAMETER14.1240 INCHES MINIMUM AND 14.1250 INCHES MAXIMUM IN
OVERALL WIDTH8.8650 INCHES MINIMUM AND 8.8750 INCHES MAXIMUM IN
LARGEST BORE DIAMETER10.0020 INCHES MINIMUM AND 10.0030 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
00044Interchangeable
interchangeable cross-reference
interchangeable
00044REVA TY1 CASE/TY 2A ELEMENTInterchangeable
interchangeable cross-reference
interchangeable
27271Interchangeable
interchangeable cross-reference
interchangeable
PC21J4R5Interchangeable
interchangeable cross-reference
interchangeable
7271Interchangeable
interchangeable cross-reference
interchangeable
P58Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 100CRT141H88?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 100CRT141H88?
100CRT141H88 is a BEARING,ROLLER,RADIAL AND THRUST.
What parts can replace 100CRT141H88?
There are 7 known substitutes for 100CRT141H88: 00044, 00044REVA TY1 CASE/TY 2A ELEMENT, 27271 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 100CRT141H88?
100CRT141H88 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-01-006-9135. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 100CRT141H88

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026