PartsTable
Technical Data Sheet
Download PDF

100C0471-1 — NUT,PLAIN,CLINCH

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

100C0471-1: NUT,PLAIN,CLINCH.

The NUT,PLAIN,CLINCH is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, nut_style: CLINCH, nut_height: 0.163 INCHES NOMINAL IN, nut_diameter: 0.359 INCHES NOMINAL IN, pilot_length: 0.038 INCHES MAXIMUM IN, thread_class: 2B. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-182-6252, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
100C0471-1
NSN: 5310-00-182-6252
FSC: 5310 — Nuts and Washers
CAGE: 13136 — WEST ELECTRONICS INC (USA)
SPECIFICATIONS
materialSTEEL OVERALL
nut_styleCLINCH
nut_height0.163 INCHES NOMINAL IN
nut_diameter0.359 INCHES NOMINAL IN
pilot_length0.038 INCHES MAXIMUM IN
thread_class2B
thread_seriesUNIFIED NATIONAL COARSE (UNC)
pilot_diameter0.289 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
features_providedFLOATING NUT
surface_treatmentCADMIUM OVERALL
nominal_thread_size0.086 INCHES IN
NSN5310-00-182-6252
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 100C0471-1 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 1,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
THREAD SERIES: UNIFIED NATIONAL COARSE (UNC)
•
FEATURES PROVIDED: FLOATING NUT
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.086 INCHES IN
•
NUT DIAMETER: 0.359 INCHES NOMINAL IN
•
PILOT DIAMETER: 0.289 INCHES MAXIMUM IN
•
PILOT LENGTH: 0.038 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 1,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD SERIESUNIFIED NATIONAL COARSE (UNC)
FEATURES PROVIDEDFLOATING NUT
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.086 INCHES IN
NUT DIAMETER0.359 INCHES NOMINAL IN
PILOT DIAMETER0.289 INCHES MAXIMUM IN
PILOT LENGTH0.038 INCHES MAXIMUM IN
NUT HEIGHT0.163 INCHES NOMINAL IN
SURFACE TREATMENTCADMIUM OVERALL
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES 1
AS256-1Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 100C0471-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 100C0471-1?
100C0471-1 is a NUT,PLAIN,CLINCH.
What parts can replace 100C0471-1?
There is 1 known substitute for 100C0471-1: AS256-1. Substitute compatibility should be verified for your specific system.
What is the NSN for 100C0471-1?
100C0471-1 is cataloged in the U.S. Government catalog under NSN 5310-00-182-6252. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 100C0471-1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.