PartsTable
Technical Data Sheet
PartsTable / O-RING / 100A10-28
100A10-28 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER ISOBUTYLENE-ISOPRENE CLASS IIR, center_hole_diameter: 1.465 INCHES MINIMUM AND 1.485 INCHES MAXIMUM IN, cross-sectional_height: 0.205 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-542-1851, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
100A10-28
NSN: 5331-00-542-1851
FSC: 5331 — O-RING
CAGE: 78062 — SARGENT AEROSPACE & DEFENSE, LLC DBA SARGENT CONTROLS & AEROSPACE DIV SARGENT CONTROLS & AEROSPACE (USA)
SPECIFICATIONS
materialRUBBER ISOBUTYLENE-ISOPRENE CLASS IIR
center_hole_diameter1.465 INCHES MINIMUM AND 1.485 INCHES MAXIMUM IN
cross-sectional_height0.205 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN
NSN5331-00-542-1851
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 100A10-28 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CENTER HOLE DIAMETER: 1.465 INCHES MINIMUM AND 1.485 INCHES MAXIMUM IN
•
CROSS-SECTIONAL HEIGHT: 0.205 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN
•
MATERIAL: RUBBER ISOBUTYLENE-ISOPRENE CLASS IIR
TECHNICAL CHARACTERISTICS (FLIS)
CENTER HOLE DIAMETER1.465 INCHES MINIMUM AND 1.485 INCHES MAXIMUM IN
CROSS-SECTIONAL HEIGHT0.205 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN
MATERIALRUBBER ISOBUTYLENE-ISOPRENE CLASS IIR
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
AN6227-28Interchangeable
interchangeable cross-reference
interchangeable
AN6227-28ESInterchangeable
interchangeable cross-reference
interchangeable
SP3128PCSP3128Interchangeable
interchangeable cross-reference
interchangeable
29KP388Interchangeable
interchangeable cross-reference
interchangeable
N304-75-325Interchangeable
interchangeable cross-reference
interchangeable
5330005803846Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 100A10-28?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 100A10-28?
100A10-28 is a O-RING.
What parts can replace 100A10-28?
There are 13 known substitutes for 100A10-28: AN6227-28, AN6227-28ES, SP3128PCSP3128 and 10 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 100A10-28?
100A10-28 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-542-1851. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 100A10-28

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026