PartsTable
Technical Data Sheet
PartsTable / MRO / 100936
100936 ✓ Verified by PartsTable
Hama · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

- MDF frame<br>- Including mount<br>- High-quality ground glass<br>- Precision mitre<br>- With heavy-duty hook. Key specifications include material: STEEL, link_style: PIN, shaft_type: ROUND, FLATTED SINGLE ACTUATOR, flat_height: 0.216 INCHES NOMINAL SINGLE ACTUATOR IN, temp_rating: -15.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF, circuit_type: PARALLEL. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-166-0963, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 100936
NSN: 5331-00-166-0963
FSC: 5331 — O-RING
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialSTEEL
link_stylePIN
shaft_typeROUND, FLATTED SINGLE ACTUATOR
flat_height0.216 INCHES NOMINAL SINGLE ACTUATOR IN
temp_rating-15.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
circuit_typePARALLEL
shaft_length0.625 INCHES NOMINAL SINGLE ACTUATOR IN
thread_class2A SINGLE MOUNTING FACILITY A
overall_width1.188 INCHES NOMINAL IN
pole_quantity1 EACH SECTION FRONT
terminal_typeTAB, SOLDER LUG
thread_length0.375 INCHES NOMINAL SINGLE MOUNTING FACILITY IN
NSN5331-00-166-0963
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 100936 MFR: Hama ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
•
MATERIAL: RUBBER FLUOROCARBON CLASS FPM
•
HARDNESS RATING: 75.0 SHORE DUROMETER A NOMINAL
•
OUTSIDE DIAMETER: 0.243 INCHES MINIMUM AND 0.265 INCHES MAXIMUM IN
•
TEMP RATING: -15.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
•
ELONGATION PERCENTAGE: 125 MAXIMUM
•
CENTER HOLE DIAMETER: 0.108 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL HEIGHT0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
MATERIALRUBBER FLUOROCARBON CLASS FPM
HARDNESS RATING75.0 SHORE DUROMETER A NOMINAL
OUTSIDE DIAMETER0.243 INCHES MINIMUM AND 0.265 INCHES MAXIMUM IN
TEMP RATING-15.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
ELONGATION PERCENTAGE125 MAXIMUM
CENTER HOLE DIAMETER0.108 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 30
85-556Interchangeable
interchangeable cross-reference
interchangeable
102212-000Interchangeable
interchangeable cross-reference
interchangeable
650040-000Interchangeable
interchangeable cross-reference
interchangeable
5361Interchangeable
interchangeable cross-reference
interchangeable
LASR 5361-501Interchangeable
interchangeable cross-reference
interchangeable
S-15406-501Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 100936?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 100936?
100936 is a CONNECTOR,RECEPTACLE,ELECTRICAL manufactured by Hama. It is classified as a MRO (MRO_GENERAL).
What parts can replace 100936?
There are 30 known substitutes for 100936: 85-556, 102212-000, 650040-000 and 27 more. Substitute compatibility should be verified for your specific system.
Is 100936 still available?
100936 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 100936

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026