1009332M1 — SPRING,HELICAL,COMPRESSION

✓ Government record, cited

— · COMPONENT

PRODUCT OVERVIEW

1009332M1: SPRING,HELICAL,COMPRESSION.

The SPRING,HELICAL,COMPRESSION is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, end_style: SPRING END,SQUARED AND GROUND BOTH ENDS, bore_diameter: 0.213 INCHES NOMINAL IN, inside_diameter: 0.105 INCHES MINIMUM AND 0.108 INCHES MAXIMUM IN, style_designator: CONVEX, spring_free_length: 0.219 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5360-00-664-5002, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

1009332M1

NSN: 5360-00-664-5002
FSC: 5360 — Coil, Flat, Leaf, and Wire Springs
CAGE: 14398 — MASSEY-FERGUSON INC GEAR AND SHAFT PLANT DIV (USA)

SPECIFICATIONS

material	STEEL OVERALL
end_style	SPRING END,SQUARED AND GROUND BOTH ENDS
bore_diameter	0.213 INCHES NOMINAL IN
inside_diameter	0.105 INCHES MINIMUM AND 0.108 INCHES MAXIMUM IN
style_designator	CONVEX
spring_free_length	0.219 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
coil_helix_direction	RIGHT-HAND OR LEFT-HAND
spring_free_outside_diameter	0.196 INCHES MINIMUM AND 0.206 INCHES MAXIMUM IN
NSN	5360-00-664-5002

COMPONENT DIAGRAM

KEY FEATURES

•

SPRING FREE OUTSIDE DIAMETER: 0.196 INCHES MINIMUM AND 0.206 INCHES MAXIMUM IN

•

END STYLE: SPRING END,SQUARED AND GROUND BOTH ENDS

•

STYLE DESIGNATOR: CONVEX

•

SPRING FREE LENGTH: 0.219 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN

•

INSIDE DIAMETER: 0.105 INCHES MINIMUM AND 0.108 INCHES MAXIMUM IN

•

COIL HELIX DIRECTION: RIGHT-HAND OR LEFT-HAND

•

BORE DIAMETER: 0.213 INCHES NOMINAL IN

•

MATERIAL: STEEL OVERALL

TECHNICAL CHARACTERISTICS

SPRING FREE OUTSIDE DIAMETER	0.196 INCHES MINIMUM AND 0.206 INCHES MAXIMUM IN
END STYLE	SPRING END,SQUARED AND GROUND BOTH ENDS
STYLE DESIGNATOR	CONVEX
SPRING FREE LENGTH	0.219 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
INSIDE DIAMETER	0.105 INCHES MINIMUM AND 0.108 INCHES MAXIMUM IN
COIL HELIX DIRECTION	RIGHT-HAND OR LEFT-HAND
BORE DIAMETER	0.213 INCHES NOMINAL IN
MATERIAL	STEEL OVERALL

SUBSTITUTES & CROSS-REFERENCES 3

75312Reference document

Same NSN cross-reference

Reference document — Secondary reference

S1481Reference document

Same NSN cross-reference

Reference document — Secondary reference

D75312Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusCancelled· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy 1009332M1?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 1009332M1?

1009332M1 is a SPRING,HELICAL,COMPRESSION.

What parts can replace 1009332M1?

There are 3 known substitutes for 1009332M1: 75312, S1481, D75312. Substitute compatibility should be verified for your specific system.

What is the NSN for 1009332M1?

1009332M1 is cataloged in the U.S. Government catalog under NSN 5360-00-664-5002. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

1009332M1 — SPRING,HELICAL,COMPRESSION

Request a Quote — 1009332M1